18" Pro Wheels/ 68 Camaro

[68ss396]

Well after countless hours of looking at wheels I finally pulled the trigger.
I was close to buying rushforths but they were not in my budget and I still need big brakes. The wheels I bought are from Pro Wheels in CA.
The wheels are brushed and cleared forged centers and uncoated high polished hoops.

Measurements
Front
8 x 18
4.875 BS
235/40/18

Rear
9 x 18
5.25 BS
255/45/18

Front has 2" lower springs and 3" lower in the rear + 1/2" blocks
This site has helped me a lot in my search so I thought I would give back.
Rich
Well after countless hours of looking at wheels I finally pulled the trigger.
I was close to buying rushforths but they were not in my budget and I still need big brakes. The wheels I bought are from Pro Wheels in CA.
The wheels are brushed and cleared forged centers and uncoated high polished hoops.

Measurements
Front
8 x 18
4.875 BS
235/40/18

Rear
9 x 18
5.25 BS
255/45/18

Front has 2" lower springs and 3" lower in the rear + 1/2" blocks
This site has helped me a lot in my search so I thought I would give back.
Rich
https://static1.pt-content.com/images/noimg.gif (http://imageshack.us/photo/my-images/707/8311.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
https://static1.pt-content.com/images/noimg.gif (http://imageshack.us/photo/my-images/845/photo309a.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[FadedSS]

Nice, what vendor did you use?

[ProdigyCustoms]

Look really good. the brush center really work with your car color.

Pro Wheels are by far the best bang for the buck wheel we sell.

[68ss396]

Nice, what vendor did you use?

I bought them direct.
Thanks for the compliments

[TT302Z28]

:twothumbs:

Good looking wheels!

[Nine Ball]

Looks good. I hope they last, I won't be selling them any longer.

Tony

[FirstGenZq8]

Looks good. I hope they last, I won't be selling them any longer.

Tony

lame cryptic post. you hope they last...why? have they taken a turn for the worse as far as quality goes?

68ss396, your car looks great!

[Nine Ball]

lame cryptic post. you hope they last...why? have they taken a turn for the worse as far as quality goes?

68ss396, your car looks great!

Details huh? How about cracked welds, finishes peeling off - brand new out of the box, and warranty repairs that took 3-4 months?

[MyFriendScott]

wheels look great with the stance. When those tires are ready for replacement, you could go up to a 245 in the front and a 275 in the rear if you choose

[FirstGenZq8]

Details huh? How about cracked welds, finishes peeling off - brand new out of the box, and warranty repairs that took 3-4 months?

perfect. thank you for specifics.

[68ss396]

wheels look great with the stance. When those tires are ready for replacement, you could go up to a 245 in the front and a 275 in the rear if you choose

Thanks however they barely fit now and I like the tire to slightly roll in to the rim instead of fatten out.
As far as the quality from Pro Wheels....I have had these on for about 4 months. I have not had any issues with quality of the wheel or finish. They were a little slow with getting them out but that wasn't a big deal to me.

[geberhard]

Rich thanks for sharing they actually look great! I am all for trying something new. OD you mind sharing how much these go for? I am in CA an planning to get a couple sets for a few projects, and was debating on some BOSS 338's as I see cool wheels out there but keep coming back to the BOSS for the price and quality (similar to Torq, a fraction of the cost). I am not a vendor by the way.

Thx, Gui

[68ss396]

Rich thanks for sharing they actually look great! I am all for trying something new. OD you mind sharing how much these go for? I am in CA an planning to get a couple sets for a few projects, and was debating on some BOSS 338's as I see cool wheels out there but keep coming back to the BOSS for the price and quality (similar to Torq, a fraction of the cost). I am not a vendor by the way.

Thx, Gui
Thanks...If I remember correctly about $450 per wheel