zo6 seats in 69 camaro

[69blackwhss]

does anyone have the info are pics on what it takes to make the zo6 front seats to work in a 69 camaro couple? any info would be great...

[compos mentis]

This fellow did one.

http://www.lateral-g.net/forums/show...1&postcount=63

[parsonsj]

Us guys with C6 Z06's wish we could easily swap the factory seat to something else. Anything else, in fact. The seats are truly junk, and easily the weakest part of the car. At track days, we joke about the "Corvette bruises" we get: bruises on the outside of your knees where you wedge them against the interior and door in a futile attempt to hold yourself in place.

And just as important: the seats are integrated into the C6 BCM along with the side impact airbag module and steering wheel telescoping controls, which is why we have a hard time changing them out. GM did nobody any favors with their Z06 seat and interior design.

If you haven't bought those seats yet, I'd look elsewhere. Look at the Cobra Suzuka, or even something from Corbeau. Those seats will integrate a lot better with traditional track day harness, and hold you in place as a bonus.

[69blackwhss]

i looked but i couldnt find were he did the seats just were he used zo6 stuff

[69blackwhss]

thanks for the info an ill look into the cobra an corbeau also

Us guys with C6 Z06's wish we could easily swap the factory seat to something else. Anything else, in fact. The seats are truly junk, and easily the weakest part of the car. At track days, we joke about the "Corvette bruises" we get: bruises on the outside of your knees where you wedge them against the interior and door in a futile attempt to hold yourself in place.

And just as important: the seats are integrated into the C6 BCM along with the side impact airbag module and steering wheel telescoping controls, which is why we have a hard time changing them out. GM did nobody any favors with their Z06 seat and interior design.

If you haven't bought those seats yet, I'd look elsewhere. Look at the Cobra Suzuka, or even something from Corbeau. Those seats will integrate a lot better with traditional track day harness, and hold you in place as a bonus.

[compos mentis]

i looked but i couldnt find were he did the seats just were he used zo6 stuff

In the link I posted there is also a link to the whole thread. It shows the seats in the car.

[69blackwhss]

In the link I posted there is also a link to the whole thread. It shows the seats in the car.

ok saw them this time but didnt say what he had to do to make them work i just want to get all the info be for i buy them are other ones u know thanks for the link buddy

[compos mentis]

ok saw them this time but didnt say what he had to do to make them work i just want to get all the info be for i buy them are other ones u know thanks for the link buddy

You're welcome. I would think Bob would be glad to help you if you contacted him.

[69blackwhss]

You're welcome. I would think Bob would be glad to help you if you contacted him.

i wrote him when i couldnt find it lol