PDA

View Full Version : Who has the best deal on dynamat?



brownz
07-06-2011, 05:01 AM
Looking to get some dynamat and want to know the best place to get a good deal.

Thanks

MoonMan
07-06-2011, 08:27 AM
I got mine on Amazon...Dynamat Xtreme Bulk Pack I don't think you'll find a better price ($124.95) and it's free shipping!

http://www.amazon.com/Dynamat-10455-Xtreme-Bulk-Sheets/dp/B00020CB2S

KUSI
07-06-2011, 09:51 AM
Ditto what Tim said. I checked around with quite a few places locally and a ton of places online. The cheapest deal is still going to be Amazon. The free shipping needs to be considered too when checking prices.

KUSI

69X22
07-06-2011, 04:48 PM
I bought 2 boxes off of ebay. One box was sticky as hell the other one didn't stick very good. I called dynamat and they said they wouldn't warrantee it because it came off ebay and that there is some fake stuff out there with their name on it. (Who knows)

ProdigyCustoms
07-06-2011, 05:30 PM
That is where we buy it, that price is lower then our dealer pricing!

6D9 Matt
07-07-2011, 07:04 AM
Is that bulk pack on amazon enough for a first gen Camaro? I am getting a new tranny installed next week, and this would probably be a good idea while the carpet, etc is out (going from auto to manual).

dontlifttoshift
07-07-2011, 07:54 AM
While you guys are searching for the cheapest price, check out the MEGA PACK. the sheets are 24 x 48 insead of 18 x 36 and ship FLAT instead of rolled up in a box. even at my price its twice the material for less than twice the price....more money saved. It's still not enough to do a whole car, though.

I wish I could buy a 100 foot roll and hang it on the wall like carpet at the home depot.

MoonMan
07-07-2011, 10:00 AM
Is that bulk pack on amazon enough for a first gen Camaro? I am getting a new tranny installed next week, and this would probably be a good idea while the carpet, etc is out (going from auto to manual).

Depends on how much coverage you want. I did literally every square inch I could (floors, doors, roof, trunk, inside qtr panel, etc.) and I think it took me over 4 boxes. In hindsight I could have scaled back and gotten enough benefit with probably half that.

Blown73
07-07-2011, 10:36 AM
I don't know how set you are on dynamat, but Fatmat is really good and is way less expensive than dynamat. 100 sf for $130 and free shipping. I bought the 100 sf roll and it was more than enough to do the entire car. Just my .02!

MoonMan
07-07-2011, 12:23 PM
If you haven't already, I would read through this thread...

https://www.pro-touring.com/showthread.php?58614

Blown73
07-07-2011, 01:15 PM
Interesting write up! I haven't had any issues with the Fatmat, my car does not stink during the summer, and it works great in my car. I can't speak for others experiences, but mine has been good thus far in two cars.

evostilo
07-07-2011, 02:23 PM
I got mine on Amazon...Dynamat Xtreme Bulk Pack I don't think you'll find a better price ($124.95) and it's free shipping!

http://www.amazon.com/Dynamat-10455-Xtreme-Bulk-Sheets/dp/B00020CB2S

Did you get it @ this price before or is this a 4th of July sale price?

aps63
07-11-2011, 03:12 PM
As you can see I did every square inch of the inside of the car and the insides of the doors.
I used 4 - 1/2 boxes. That includes the firewall and under the dash.
I have never used fatman but I never see the top builders use anything other than Dynamat.
That should say something.
I got mine on ebay about a year ago, and I believe it was the same as the amazon price you gave. Mine also included free shipping. Which makes a big differance because those boxes are heavy. Especially 5 boxes.

MoonMan
07-12-2011, 10:21 AM
Did you get it @ this price before or is this a 4th of July sale price?

It seems to fluctuate by a few dollars. I paid $135 for the first two boxes and $130 for the others (February). Both with FS...so this was a little better price.

pw2006
07-12-2011, 10:30 AM
Hi Paul- I am trying to figure out how many bulkpack boxes I will need for my 69 camaro. You mentioned 4.5 boxes... were those bulkpack boxes?
Thank you,
Rob

aps63
07-12-2011, 06:20 PM
Yes Rob, they were the bulk packs.
But remember I did the insides of my doors too.
You could probably get away with 4 if you don't do your doors.
To me it was worth it though, the first time I closed that door and heard that solid new car sound.
It was awesome.
Good luck.
Paul

pw2006
07-12-2011, 07:44 PM
Thanks Paul!

WEAVER
07-17-2011, 09:07 PM
I've seen it on eBay cheaper than we can buy it with are dealer price, Trust me I buy a lot of it. We also use Acumat. Sticks good also.

dhutton
01-16-2012, 10:58 AM
Bump...

MoonMan
01-17-2012, 01:55 PM
Currently $134.99 w/free shipping on Amazon.

ricoshay
01-18-2012, 11:24 AM
I used a company that is well known in the car audio world. Its called "second skin".

Gearing up to finish my 1972 chevelle convertible for the spring. Since its convertible and has some new sheet metal,id like to keep the noise to only the sound of my music and exhaust.

So far I've got spectrum on the quarters and in the trunk...then a couple layers of damplifier pro in the trunk and interior floors..would like some more of each forthe trunk lid, rear support and doors.

https://static1.pt-content.com/images/pt/2012/01/20111209180840-1.jpg
https://static1.pt-content.com/images/pt/2012/01/20111209125332-1.jpg
https://static1.pt-content.com/images/pt/2012/01/20111209125415-1.jpg
https://static1.pt-content.com/images/pt/2012/01/20111209125432-1.jpg
https://static1.pt-content.com/images/pt/2012/01/20111209125521-1.jpg

Overall,the stuff is great to work with. Id like for the foil to be a lil more flexible to be able to reduce wrinkles but no big deal. Can't wait to install the sounds!


here's a link to their site. a rep from here should contact them about deals,etc.they are active with the forums.

http://secondskinaudio.com/

mincharlie
01-26-2012, 10:24 AM
Got mine off ebay, it is nice and sticky. I was worried it might be fake becouse of the price, but it seems to be the real thing.

john55blaze
02-03-2012, 11:04 AM
Has anyone used dynamat or second skin on the underside of a hood? I have two vehicles in mind one being my camaro and the other being a 55 chevy truck (4x4) thats used regularly off road. Any ideas how this stuff would hold up to "the elements"??? Thanks for the help

duckmanjbr
02-03-2012, 11:35 AM
Why is no one using a spay-on sound killer? Something like lizard skin or Dynamat spray? My experience is that it's way easier to apply and works much better than the paper stuff.

nacnac
02-15-2012, 03:11 PM
How does the spray on stuff compare? Im thinking about using lizard skin.

duckmanjbr
02-15-2012, 06:07 PM
I've never used the Lizard Skin brand but I've used 2 or 3 different spray-in types over the past few years. I've always liked the spray better. It's a little more work up front but the coverage is better and in my experience you don't need to worry about it becoming unstuck. I've had a problem once or twice with the stick-on paper falling off; especially on the roof. The spray can be more expensive if your doing small rattle cans but if you can spray it on by the gallon it's very similar in price and I think it works better simply because of the better area coverage. It's much easier to cover hard to reach places (aka door skins or behind rear panels). The paper is nice to do small add-on stereo installs but if you have the car stripped and can easily spray the whole thing at once it's really easy and quick! Even though Lizard Skin is a "newer" brand this type of stuff has been around for over a decade.

patriot68
02-16-2012, 11:03 AM
http://www.streetsideauto.com/search.asp?keywords=dynamat
free shipping

CreepinDeth
02-23-2012, 12:36 PM
I used Brown Bread from B-quiet.
It's now been updated to B-Quiet Ultimate

http://www.b-quiet.com/compare.html

However, I'm strongly considering using Peel and Seal from Lowes for my 2nd car.
Just airing it out for 3 days in the heat and I've heard it's fine after that.
LOTS Of people using it.

john55blaze
02-23-2012, 03:34 PM
FWIW I am in the process of removing Fat Mat from the cab of my truck for a number of reasons. I don't live in a particularly hot part of the country but there is a slight hint of tar, and using a heat gun to remove increases the smell, so on a hot day...Also after being in my truck for about 4 years the fatmat on verticle surfaces is starting to peel. On both flat and vertical surfaces I found rust starting to form which would lead me to believe water is somehow getting under the product. Also one layer didn't give me much sound deadening at all (hardly noticable). This stuff is a bear to remove in the places it did stick and for future products I will use either secondskin or dynamat extreme. Do yourself a favor and buy the good stuff Im pretty thrifty but in this case you get what you pay for!

MoonMan
02-24-2012, 11:26 AM
Do yourself a favor and buy the good stuff Im pretty thrifty but in this case you get what you pay for!

x2!