Results 1 to 2 of 2
-
06-15-2011 #1
Registered User
- Join Date
- Apr 2010
- Location
- Northeast Pennsylvania
- Posts
- 3
MC1312A Master Cylinder problems??
A bought this master cylinder from Frank at Prodigy Customs, but did not realize the fittings are 3/8-24. My brake lines have the stock 1/2-20 and 9/16-18 fittings .What do I do to hook this thing up as I have not been able to locate adapers that will work....Also, do I need to use the stock distribution block, if I use the Wilwood adj. pressure valve??
Thanks
-
06-18-2011 #2
Registered User
- Join Date
- Sep 2006
- Location
- Southern Indiana
- Posts
- 4,709
What size are your lines, Pep Boys usually has several different size/thread tube nuts. Is there enough line left to cut off old and reflare with different size nuts?
Lee Abel
AFTERMARKET PERFORMANCE
1977 Chevy Monza 2+2:Project "Cheap Trick"
1978 C10 Long bed , On air and trailer puller
2006 Buell Blast ,Just a bike to ride and for mileage
1966 Caprice 4dr Sports Roof fact.327/now 350/SOON 454???? Project "II Old,,,ZERO BUDGET OR LESS CAPRICE!"
Reply With Quote
