Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Nov 2009
      Location
      Bakersfield Ca.
      Posts
      167

      A-Body Steering parts replacement, suggestions?

      Getting my front end finished up but looking for steering tie rods, idler, pitman and center link thoughts, replace with all Moog replacements or is there something better?
      The car still needs to be plumbed with brake lines and a few other things before it can be drove so I have a couple weeks if I need to order anything special, just didn't want to over look something if I should be looking at it.

      '70 SBC 383 Stroker - Rushforth Rated X wheels - 14" Wilwood - Anvil Carbon Fiber hood/deck lid - Fesler billet - Corbeau Sport Seats, and still building....

      Youtube & Instagram - @nick.v70 & @ChevelleFactory


    2. #2
      Join Date
      Feb 2006
      Location
      Tennessee
      Posts
      814
      Country Flag: United States
      I just ordered all my steering parts from Napa for my 66. All but the centerlink are sourced from Dana/Spicer. I went with the centerlink they had as no one else could get me one.

      Kerry

    3. #3
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,872
      Country Flag: United States
      NAPA premium parts are made in the USA unlike most others. As best I could find out they appear to be made by Spicer.
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside

    4. #4
      Join Date
      Nov 2009
      Location
      Bakersfield Ca.
      Posts
      167
      Thanks guys, so moog or spicer replacements and add some billet adjusters is what I am finding from the sounds of it. Looks like I will just order this.
      '70 SBC 383 Stroker - Rushforth Rated X wheels - 14" Wilwood - Anvil Carbon Fiber hood/deck lid - Fesler billet - Corbeau Sport Seats, and still building....

      Youtube & Instagram - @nick.v70 & @ChevelleFactory

    5. #5
      Join Date
      Apr 2011
      Location
      Lost Wages, NV (LAS VEGAS)
      Posts
      4
      Country Flag: United States
      I have a 72 cutlass when i redid my front end i used the Hotckis complete front end kit worked GREAT!! nice clean tight turns easy adjustment if needed and it looks good (which never hurts).




    Advertise on Pro-Touring.com