Results 1 to 4 of 4
Thread: wheel studs?!
-
05-03-2011 #1
Registered User
- Join Date
- Apr 2005
- Location
- IN/MI border
- Posts
- 1,920
wheel studs?!
Need rear wheel studs. My axles have provisions for 1/2" threaded studs or 7/16" press in's. I want the 1/2's so what do I need to use? Can I just used a 3"-4" long fine threaded 1/2" hardened cap screw? Or do I need something more special?
-
05-03-2011 #2
Registered User
- Join Date
- Apr 2005
- Location
- IN/MI border
- Posts
- 1,920
actually these will probably work...
http://www.summitracing.com/parts/MOR-46200/
05-03-2011 #3
Registered User
- Join Date
- Mar 2008
- Location
- Chicago suburbs
- Posts
- 667
ARP makes a nice set, too- they have a little starter nub, but they are 3" long
05-03-2011 #4
Registered User
- Join Date
- Apr 2009
- Location
- san diego
- Posts
- 5,101
That is what I run. They are very nice!
Originally Posted by another69
My build thread: https://www.pro-touring.com/showthre...ing&highlight=
The mustang build thread: https://www.pro-touring.com/showthre...el)&highlight=
Reply With Quote
