Results 1 to 8 of 8
Thread: Vintage Air Compressor Bracket
-
03-11-2011 #1
Registered User
- Join Date
- Feb 2009
- Location
- N.J.
- Posts
- 690
Vintage Air Compressor Bracket
I just ordered a Vintage Air system for my 70 Camaro.
I already have March brackets and pullies for the alt. ps pump.
Any suggestions for the a/c comp bracket(drivers side mount)?
Unless I'm missing it, March does not offer it.
Thanks for any help.
-
03-11-2011 #2
Registered User
- Join Date
- Oct 2008
- Location
- Kingsland, GA
- Posts
- 114
They do. What kit number do you have?
03-11-2011 #3
Registered User
- Join Date
- Feb 2009
- Location
- N.J.
- Posts
- 690
It's the Ultra brackets with V-groove pullies.
03-11-2011 #4
Registered User
- Join Date
- Oct 2008
- Location
- Kingsland, GA
- Posts
- 114
Merry Christmas
Linky-poo
03-12-2011 #5
Registered User
- Join Date
- Feb 2009
- Location
- N.J.
- Posts
- 690
Thats the ticket. Thanks.
Now I just have to swap all the other pullies for serpentine ones.
Thanks again.
03-12-2011 #6
Registered User
- Join Date
- Feb 2009
- Location
- N.J.
- Posts
- 690
If I run the Vintage Air brackets and keep the V-groove pulley's do I need to install an idler pulley?
I ordered the Vintage air kit from Prodigy Customs.
I have a read a lot of good things about them on these forums.
Thanks again for any help.
03-12-2011 #7
Registered User
- Join Date
- Oct 2008
- Location
- Kingsland, GA
- Posts
- 114
As long as you have a way to keep tension on the belt, I don't believe you need the idler pulley.
03-12-2011 #8
Registered User
- Join Date
- Feb 2009
- Location
- N.J.
- Posts
- 690
I haven't recieved the VA unit yet. Should be here next week.
So I'm not sure how much of the belt will be in contact with the ps pump.
Just trying to think ahead.
Reply With Quote
