Results 1 to 6 of 6
-
02-14-2011 #1
Registered User
- Join Date
- Apr 2010
- Location
- Montebello, CA
- Posts
- 250
do ZO6 Brakes bolt up to 67-69 camaro ATS spindle?
does anybody know if the Z06 corvette calipers bolt straight up to the tall 67-69 camaro ATS spindles?
-
02-14-2011 #2
Registered User
- Join Date
- Nov 2006
- Location
- Mountain Springs, Texas
- Posts
- 4,870
Yes they do as far as I know. Check out kore3.com
1969 Camaro - LSA 6L90E AME sub/IRS
1957 Buick Estate Wagon
1959 El Camino - Ironworks frame
1956 Cameo - full C5 suspension/drivetrain
1959 Apache Fleetside
02-14-2011 #3
Registered User
- Join Date
- Oct 2006
- Location
- Phoenix, AZ
- Posts
- 826
They do bolt up to the spindles no problem. Where people run into issues most often is spoke clearance with their wheels. These calipers require that the wheels have enough "pad" (where the lug nut holes are drilled) to put the spokes far enough outboard to clear the calipers. It's not impossible at all, but run-of-the-mill cast wheels may or may not clear.
Jeff K.
69 Camaro SS, 406 SBC, TKO600, 9" w/3.73 tru-trac, Speedtech Arms, AFX Spindles, Lee 670 Box, Baer GT front, C5Z rear. Hyperco Leafs w/ Fays2 Watts Link + Varishocks.
02-14-2011 #4
Registered User
- Join Date
- Jul 2006
- Location
- Phoenix
- Posts
- 467
I have them on my ATS spindles with no problems, bolt right on. Wheels are Rushforth Super Spoke 18's
Erik
https://www.pro-touring.com/showthre...without-a-name
Camaro LS2, T56, 12 bolt, C6 Z06 brakes, Rushforth Super Spokes, ATS Spindles
2006 Chevy Trailblazer SS
02-14-2011 #5
Registered User
- Join Date
- May 2009
- Location
- Florida
- Posts
- 233
Yes, without a problem
02-15-2011 #6
Registered User
- Join Date
- Mar 2005
- Location
- St George Utah
- Posts
- 1,243
and there you have it!
Reply With Quote
