Electric Fan Option

[AintQik]

Was planning on running the Mark IV but I dont have the room. So I have one that will now act as a paperweight and need something that is comparable in CFM but thinner. Any suggestions, or places I can go to see a bunch of physical dimensions?

[1969sschevelle]

http://stores.ebay.com/AEON-IMPORTS/FAN-ASSEMBLY-/_i.html?_fsub=1363463013&_sid=808940623&_trksid=p4634.c0.m322

I used a dual fan from Ford Windstar .

[H2Ogbodies]

Is this for your 67? Why won't it fit?

[AintQik]

BB, long WP, serpentine belt system, really cool pullies I don't want to lose. There isn't enough clearance between the nose of the WP pulley and the rad. and... I just realized this is in heating and AC. Doah!

[kustom71]

I am using a taurus fan with two speeds.It is thinner than the lincoln fan and it can also be trimmed up some.
I am running a 475BB with long water pump and GM serp.setup I made fit.

[AintQik]

S Jersey? Where at I'm in Berlin.

[kustom71]

Turnersville!!!!

[nekkidhillbilly]

ls1 or lt1 fans?

[rickpaw]

Have you tried turning the fan upside down? I had to turn it upside down to make it fit. It's a tight fit. I have a Pontiac 400 with long wp.

Tu