Results 1 to 3 of 3
-
12-16-2010 #1
Registered User
- Join Date
- Sep 2009
- Location
- tampa fl
- Posts
- 184
Quick help on rim specs please help
Hey guys im getting ready to buy another set of wheels and they are 18x9/20x10's and The offset for the front wheels is 5 1/4 and the rear wheels are 6 1/4 and the bolt pattern is 5 on 5
i have a 65 chevelle on full air ride, stock 12 bolt rear end
-
12-17-2010 #2
Registered User
- Join Date
- Aug 2004
- Location
- Roswell, N.M.
- Posts
- 572
Hello,
I would like to suggest that some measurements be taken off the car. Dumping with Airide will make a difference. Let me know if you would like help measuring your car. Below is a pic of 64 El Camino on Air that I built and it was a tight squeeze...
Regards,
12-17-2010 #3
Registered User
- Join Date
- Oct 2005
- Location
- Corona, CA
- Posts
- 681
Just so have a reference, when we build set for the 64-65 A-Body, 18x7 in front and a 18x9(barely) with a limited tire width. With air ride, the 9 in the rear is going to be tough.
Last edited by JustinB; 12-17-2010 at 09:08 AM.
Reply With Quote
