Steel Shape Charts w/ weights per ft

[John Wright]

Angle - http://www.metrosteelfl.com/angle.html
Plate - http://www.metrosteelfl.com/plate.html
WF Beam - http://www.metrosteelfl.com/beams.html
Channel - http://www.metrosteelfl.com/channel.html
Round Bar - http://www.metrosteelfl.com/rounds.html
Square Bar - http://www.metrosteelfl.com/squres.html
Strip - http://www.metrosteelfl.com/strips.html
Flat - http://www.metrosteelfl.com/flats.html
Square Tubing - http://www.metrosteelfl.com/squaretube.html
Rectangular Tubing - http://www.metrosteelfl.com/rectube.html
Pipe - http://www.metrosteelfl.com/pipe.html
Sheet - http://www.metrosteelfl.com/sheet.html
Expanded Metal or Grating - http://www.metrosteelfl.com/grating.html

[absintheisfun]

Good info. If you know of a central place for the strength ratings of the different types of steel that would be awesome as well.

Whenever I am about to start a project, I take a great expedition of the internet to find the different ratings--why pay for a 1/4" thick 2" OD square tube when a 1/8" thick 1" OD square tube will do!?