Steve1968LS2
10-26-2010, 07:38 PM
Shaun Dove (TwinSting) over at EVOD showed me a new deal he is doing. In short he has a way to cast emblems now. So he took my Bad Penny logo, scanned it, made it 3Dish and then made centercaps for my wheels.
He said he ca do this with any logo or car name and the cost for the entire set of custom one-off center caps is only about $250. Considering the billet Forgeline caps run $200 that's a hell of deal.
He can color them many ways, these he used a dye to give the patina copper look.
He can also do one off emblems as well (like if you had a car name or something) for under a hundred bucks.
Just thought I would share :)
His site is www.evodindustries.com (http://www.evodindustries.com) I think.
https://static1.pt-content.com/images/pt/2010/10/73j9tw-1.jpg
He said he ca do this with any logo or car name and the cost for the entire set of custom one-off center caps is only about $250. Considering the billet Forgeline caps run $200 that's a hell of deal.
He can color them many ways, these he used a dye to give the patina copper look.
He can also do one off emblems as well (like if you had a car name or something) for under a hundred bucks.
Just thought I would share :)
His site is www.evodindustries.com (http://www.evodindustries.com) I think.
https://static1.pt-content.com/images/pt/2010/10/73j9tw-1.jpg