DriverzInc: 2 New 3pc NewGen wheels! Concave.....

[DriverzInc]

Thought I'd show you some new wheels NewGen just finished.

We're using a new forging that allows us to give the wheel a CONCAVE profile. If you are not familiar with the term, notice how the spokes curve outboard, not inboard, and give the center the appearance of a "bowl". We're even able to do "deep" concave for rear wheel fitments. These are both shown in standard concave.

In some cases, it is possible to put concave wheels on the front, and deep concave on the rear if the offsets and the wheel width permits. For more fitment information, feel free to call us!

Key features:

• 6061-T6 Forged Aluminum
• 3 piece construction
• 18" through 24" diameter
• Soft lip only
• Custom bolt pattern
• Custom offsets
• Custom finishes, including chrome
• Custom caliper clearances
• Aluminum caps
• Hidden hardware, or exposes hardware options on every design

This one is called the "Spyder", shown in matte black center with chrome outer, and hidden hardware:






This one is called the Descendant, shown in gun metal center with chrome outer, and exposed hardware:

[70chevelle406]

Ohhhhh the Spyder is the one I want. Great job there Jon!

[Mr.VENGEANCE]

hey Jon

centercaps didnt come with my wheels.

[DriverzInc]

Vengeance, they are on my desk, freshly powder coated. I'll send them ups today

[Mr.VENGEANCE]

thanks!

pulling out the car tomorrow... boy... you gonna love this.

[DriverzInc]

thanks!

pulling out the car tomorrow... boy... you gonna love this.

HELL YEAH!!!

[go-fish]

thanks!

pulling out the car tomorrow... boy... you gonna love this.

My patience is being put to the test. I can't wait to see them!

[buickfunnycar.com]

thanks!

pulling out the car tomorrow... boy... you gonna love this.

Fricking tease...
You're killing us man...

Jon those wheels are stunning...simply stunning!

[DriverzInc]

Fricking tease...
You're killing us man...

Jon those wheels are stunning...simply stunning!

Thanks John! There are 4 more designs getting cut in CONCAVE right now, so we'll have more to show you guys very very soon.

Vengeance:
I two day air'd your caps. Put a little wd40 on the 0-ring, with the powder coat, they fit tight.

[6'9"Witha69]

Thanks John! There are 4 more designs getting cut in CONCAVE right now, so we'll have more to show you guys very very soon.

Vengeance:
I two day air'd your caps. Put a little wd40 on the 0-ring, with the powder coat, they fit tight.

If they (center caps) fit anything like Centerline Sundance series wheels, I had to put the caps in the freezer for a couple hours then wd40 the area of the rim and use a piece of wood and a dead blow hammer.

[srh3trinity]

Two more homeruns from NewGen. They just keep getting better and better.

[Matt@BOS]

Nice to see the wheels in the flesh, or should I say aluminum? If it means anything, I'd rock a set

So when do we get to see the new designs?

Matt

[DriverzInc]

Thanks Matt, glad you like them. Maybe we can put a set on a future project? We'll be cutting new designs over the next few months, can't just go and debut them all at once... We gotta spread them out a bit. Keeps everyone on their toes!

[DriverzInc]

Two more homeruns from NewGen. They just keep getting better and better.

Thank you! Glad you like the brand!