trailblazer ss intake

[dropped72ss]

I recently purchased a ls2 out of a trailblazer ss and would like to know what i need to swap to the ls6 intake? Do i need to purchase anything else besides the intake etc...

thanks, kevin

[Z06vet]

Hey Kevin. If the TB SS accessories are the same as the other trucks, the LS6 intake wont work with them. You'd need to run vette or Fbody accessories. I think GTO acc, may work as well but i am not that familiar with them. The trottle body will not clear the truck accessories. Manifold should work no problem. May also need LS6 steam pipes, depending on what is on your TBSS motor. Scott

[dropped72ss]

Ok thanks for the info.

[dhutton]

There is a lot of good swap information at www.ls1howto.com (http://www.ls1howto.com)

Edit: Just remembered you have an LS2 so some of the above site may not apply.

[dropped72ss]

I'm now leaning towards ditching this ugly intake and going carbed now. Possibly the ls Victor Jr with a Holley HP?