Results 1 to 5 of 5
Thread: Running QA1 TC1914's?
-
05-12-2005 #1
Registered User
- Join Date
- Dec 2004
- Location
- Clovis, CA (again)
- Posts
- 314
Running QA1 TC1914's?
Just recieved my QA1's and was hunting for a good starting positions for them, any suggestions? Note: I have to take them off and on to adjust, so that's why I'm asking. Thanx
Dave H.
-
05-12-2005 #2
Full Blown G-Machiner
- Join Date
- Mar 2003
- Location
- Kirkland, WA
- Posts
- 884
Front or back? On my '96 Camaro, I have the fronts set on 9 and the back on 3 for just general driving around.
05-12-2005 #3
Registered User
- Join Date
- Dec 2004
- Location
- Clovis, CA (again)
- Posts
- 314
Thanx for the info, I'm running QA1 front and rear and I'll be running Buttonwillow, so before I go I'll toy with the settings at that starting point.
Dave H.
05-12-2005 #4
Full Blown G-Machiner
- Join Date
- Mar 2003
- Location
- Kirkland, WA
- Posts
- 884
If I was at the track I would bump up the fronts, maybe to 11, but probably not the backs. For drag racing, I'd go with about a 3 up front and a 5 or six in the back as a starting point.
05-24-2005 #5
Registered User
- Join Date
- Dec 2004
- Location
- Clovis, CA (again)
- Posts
- 314
Update...rear shocks are in. 8 with normal driving is stiff, compared to KYB's, so I'm thinking 9 or 10 on the track should be a start...don't have fronts on yet
Dave H.
Reply With Quote
