Results 1 to 4 of 4
Thread: Sanden compressor mounts/GTO-LS2
-
06-05-2010 #1
Registered User
- Join Date
- Aug 2006
- Location
- Vinland Kansas,66006
- Posts
- 647
Sanden compressor mounts/GTO-LS2
I was told I cant run the stock gto ls2 a/c compressor w/ vintage air.does anybody make mounts to use a sanden compressor in the stock location.Thanks.Scott Mock
-
06-05-2010 #2
Registered User
- Join Date
- Aug 2004
- Location
- Shell Beach, CA
- Posts
- 54
Vintage air
Vintage Air p/n: 141804-MCA
It comes in a F-body or Y-body version.
Nick
06-06-2010 #3
Registered User
- Join Date
- Oct 2007
- Posts
- 1,872
Interested in this too.... word is its $90.00 from VA requires a "Huge notch" in the Frame.... Which I need to see to believe cause the ones I have seen dont look too bad....
What mount are you using?
BTW fr me moving it up is an option (the kwick eng brackets) but not one I like. Eventually I am going with a supercharger. The pullies form both Kenne Bell and Eaton are made to work with the stock GTO belt configFrom a place you will not see comes a sound you will not hear....
67 Camaro In progress
https://www.pro-touring.com/showthre...-Tap-67-camaro
06-07-2010 #4
Registered User
- Join Date
- Aug 2006
- Location
- Vinland Kansas,66006
- Posts
- 647
All of my asec.drive is stock 2006 gto.I am going to fab my own frt sub frame for my 72 camaro.So I might be able to work around the mount to a certian degree.will call vintage air tomorrow. thanks scott.
Reply With Quote
