Results 1 to 7 of 7
-
06-04-2010 #1
Registered User
- Join Date
- Jul 2005
- Location
- Eastern Virginia
- Posts
- 3,963
Someone was looking for some factory style AC dash vents
I found these looking for some AC parts for my LT1/Monte:
http://www.hotrodair.com/index.cfm/p...rod/prd173.htm
Scot
86 Monte SS
-
06-04-2010 #2
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Neat looking vent. Plus it looks like it would be easy to clean.
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
06-04-2010 #3
Registered User
- Join Date
- Jun 2007
- Location
- Greenwood, SC
- Posts
- 1,611
Looks like the vent from a newer F150
JC Scott
06-04-2010 #4
Registered User
- Join Date
- Aug 2004
- Location
- Rockford, MN
- Posts
- 278
That backside looks the same as the vintage air vents, I'd bet they are a direct replacement and would work with any VA hoses if they are the right diameter.
1969 Firebird, Black, Parchment Arizen interior, Poncho 383 (4" crank), Kauffman heads, TKO600, Moser 12 bolt, Wilwoods, DSE, Speed Tech, Koni, Hotchkis, GW, 18" TTI's, VA Gen IV, etc.
06-06-2010 #5
Registered User
- Join Date
- Dec 2009
- Location
- Butte County, CA
- Posts
- 122
how much are these?
06-06-2010 #6
Registered User
- Join Date
- Aug 2004
- Location
- Shell Beach, CA
- Posts
- 54
price
Lowest I saw was $100 each.
Nick
06-06-2010 #7
Registered User
- Join Date
- Dec 2006
- Location
- California
- Posts
- 1,368
Those are the exact same thing as a ton of OEM's except they don't have the dimple to push the vents open. And obviously they're made of aluminum. My friend's 03-06-ish Rav4 has those exact vents. You can probably get them for a lot cheaper than $100 a piece.
MattMatt
69 Nova - 357, TKO600, Tru Turn, some other stuff, awaiting LS1 swap
71 Duster - all stock, slant 6, automatic. awaiting HEMI/T56 swap
Reply With Quote
