RetroLSX oil pan

[NvrDun71]

Anybody use one of there pans? Looks like a quality piece and is nice that it is cast like an OE pan. Considering this as an alternative to an AutoKraft pan for my Nova project.

http://www.lsxtv.com/forum/new-lhx-cast-aluminum-swap-oil-2379.html#

[oestek]

Isn't there a GMPP LSX swap pan that's like $250?

[dhutton]

Isn't there a GMPP LSX swap pan that's like $250?

That is the Hummer H8 pan and it hangs too low for a first gen F body (or A body). The RetroLSX pan is the same height as the F body pan but is not as deep front to back which makes it a good choice for conversions. I think I'm going to use one on my GTO. I like the idea of a cast conversion pan.

[DarkoNova]

I've been following the thread on ls1tech for a while. He seems to have disappeared. Won't answer questions/pm's/phone calls. Just a heads up.

Matt

[dhutton]

I've been following the thread on ls1tech for a while. He seems to have disappeared. Won't answer questions/pm's/phone calls. Just a heads up.

Matt

As near as I can tell he is still selling and shipping the pans on ebay. The guys on ls1tech are chasing him for the conversion kits that he promised before he could deliver so he seems to be ignoring them.

[Samckitt]

Isn't there a GMPP LSX swap pan that's like $250?

What Kevin said, I thought there was a GMPP pan available.

[Taylor1969]

What Kevin said, I thought there was a GMPP pan available.

Works okay for the bigger cars... on the Camaros it hangs well below the subframe. If you are adventurous you could probably run one :look:

[tooblue]

What Kevin said, I thought there was a GMPP pan available.

Is this the pan you are thinking of= GM PART # 19212593
[/URL]

[URL]http://www.crateenginedepot.com/store/LS-Series-Muscle-Car-Oil-Pan-Kit-19212593-P2410C0.aspx (http://www.gmpartsdirect.com/results.cfm)

[daytonayellaz]

Jess.....That is the pan you want, its the one I was telling you about, cast at the same location as other GM pans. The GM Performance Parts pan hangs down to low as others have mentioned here.

[steve671]

Anybody use one of there pans? Looks like a quality piece and is nice that it is cast like an OE pan. Considering this as an alternative to an AutoKraft pan for my Nova project.

http://www.lsxtv.com/forum/new-lhx-cast-aluminum-swap-oil-2379.html#

I ordered one of these pans to use on my LS3 with Chassisworks subframe. I will post photos of fitment when it arrives next week.
When I called to order it, the guy Shawn answered the phone, placed the order, and shipped it the same day. FYI

[holschen]

mast is going to start selling it´s pan soon.. i hope
summer 2010
http://www.mastmotorsports.com/2010/product-view.php?cat=Oil%20Pans&id=160
I believe they are sponsors here not sure about retrolsx

[dhutton]

mast is going to start selling it´s pan soon.. i hope
summer 2010
http://www.mastmotorsports.com/2010/product-view.php?cat=Oil%20Pans&id=160
I believe they are sponsors here not sure about retrolsx

That MAST pan looks great. I like the shallow front depth. That will help a lot with A body installs where the center link hits the pan. Any ideas on price?

[holschen]

but i´m guessing 500bucks...:box::bsjerk:
maybe some of the mast guys can chimme in

[NvrDun71]

mast is going to start selling it´s pan soon.. i hope
summer 2010
http://www.mastmotorsports.com/2010/product-view.php?cat=Oil%20Pans&id=160
I believe they are sponsors here not sure about retrolsx

Yea I called them about a week ago, they said they should be available in about a month. They couldn't give me any pricing infio tho....

[PhillipM]

Yea I called them about a week ago, they said they should be available in about a month. They couldn't give me any pricing infio tho....

Mast! Yeah, I garantee it is AT LEAST $500. Those guys have nice stuff but damn.