rear caliper hanging up

[Mark Smith]

I have power disc, disc with a 1 inch bore m/c and a 8 inch booster. the lines are all 3/16". front calipers are c4 grand sport rears are willwood 4 piston. bled system many times.shimmed willwood calipers to center? still hanging up. any suggestions?

[Apogee]

What do you mean by "hanging up"? Is one or both rear calipers having the issue? If it's only one, that would rule out the MC/booster since they're both on the same hydraulic circuit. That would most likely make it either a caliper hose or caliper issue.

Tobin
KORE3

[hifi875]

your pushrod in your mc may be too long? i had that problem w/my setup when i went to 4whl disc

[Mark Smith]

ill have to see if my push rod is adjustable thanks.both calipers in rear seem to hang up.