New member from London, England

[phil k]

Hi there.

I found this site and must admit i'm very impressed with the cars and their quality on here. Anyway, here's my car, it's a 70 Mustang fastback which is about to be converted into a Pro Tourer. The engine is a 550hp 351 c with a 150hp Nitrous kit on top. It's run a 12.0 at the the drags witout the nitrous and an open diff but i'm looking for low 11's next year. My plans are new paint next month (black pearl) Ron Morris coil overs up front and a Heidts 4 link 9" rear with 350 gears. I just fitted the wheels and soon it'll be sitting a lot lot lower.

Here's a short vid of the car as it looks now.

Thanks

Phil

https://static1.pt-content.com/images/pt/2009/12/th_SANY0198-1.jpg (http://s539.photobucket.com/albums/ff358/bad-ass-67/1970%20mustang%20fastback/?action=view&current=SANY0198.flv)

[dropit69]

Welcome//.sweet car..im not to sure but you might be our first member from London..at least first i ever recall being on here..

[CruizinKev]

welcome! nice ride! :twothumbs

[phil k]

Well the car is pretty much finished now, I've just got to fit the Heidz 4 link rear. The spec is Ron Morris coil overs up front, Global west strut rods, 351 Cleveland backed up by a C6. The engine is 550HP WITH A 150HP nitrous kit and currently runs 12's but is good for mid 10's. The car is mainy road use but will see some drag action ust for the fun of it. The stripes were fitted today and the drag rims are fitted just to confirm clearance on the rear.

Phil

https://static1.pt-content.com/images/pt/2010/05/DSC02289-1.jpg

https://static1.pt-content.com/images/pt/2010/05/DSC02269-1.jpg

https://static1.pt-content.com/images/pt/2010/05/DSC02237-1.jpg

https://static1.pt-content.com/images/pt/2010/05/DSC02287-1.jpg