Results 1 to 3 of 3
-
09-23-2009 #1
Registered User
- Join Date
- Aug 2004
- Location
- Mapleton, IL.
- Posts
- 252
Control arm bushings, offset shafts
Im working on a 1964 Buick Skylark A-body and have the front end torn down for a disc brake conversion. I cant afford the tubular a- arms so I figure I am going to have to make the best of the stock arms. I am looking for some recomindations on replacement bushings, cross-shafts, and ball joints. I have heard of delrin/aluminum, poly, and steel ones. All I seem to find are the poly ones. Who has the best deal? I have heard of a tall upper ball joint but I am not sure of the benefits and if they can be used with stock spindles and control arms. Offset shafts? Thanks
-
09-26-2009 #2
Registered User
- Join Date
- Sep 2006
- Location
- Southern Indiana
- Posts
- 4,709
Suspensions
Give a shout for Marcus over at SC&C, he can point you in proper way and best bang for the buck, and he has some great deals too.
09-27-2009 #3
Registered User
- Join Date
- Oct 2006
- Location
- Pittsburgh Pa.
- Posts
- 651
Check out a pair of 58-62 B body upper control arms..
Reply With Quote
