Del-a-lum bushings for S10

[sinned]

Maybe Marcus or one of the other G-body guys around here can help. I thought I had read that the S10 LCA bushing was the same size as the G-body except that the inner bolt I.D. was smaller (ie. needs to be drilled out to fit the trucks). If so, it seems the G-body Del-a-Lum bushing kit could be used on the 1st gen S-series chassis by drilling the inner bushing sleeve out. Please correct me if my logic is wrong (and explain why GW doesn't simply make a larger I.D. inner sleeve to make their bushing kit available to S-series owners).

[Eric Howell]

They do make them.
#1023 is the uppers and #1027 is the lowers.
G bodies use #1024 for the lowers.
And yes, the front bushing for S10s is 14mm (0.551")ID and the G body is smaller.

[oestek]

Oh man, I saw this headline and misread it to say "Del-l-lum bushings for $10", not S 10... thought I found a deal! LOL.

[Jarcaines]

Oh man, I saw this headline and misread it to say "Del-l-lum bushings for $10", not S 10... thought I found a deal! LOL.

I read it the exact same way, I got REALLY excited.

[6'9"Witha69]

Oh man, I saw this headline and misread it to say "Del-l-lum bushings for $10", not S 10... thought I found a deal! LOL.
Me too!

[AustinClassic]

Oh man, I saw this headline and misread it to say "Del-l-lum bushings for $10", not S 10... thought I found a deal! LOL.

You're not the only one!

[sinned]

They do make them.
#1023 is the uppers and #1027 is the lowers.
G bodies use #1024 for the lowers.
And yes, the front bushing for S10s is 14mm (0.551")ID and the G body is smaller.
Thanks, they are not listed on their web site.