View Full Version : Adding power windows
gtotto
08-20-2009, 02:36 PM
Hey guys,
I have a 65 GTO I am in the process of restoring. I have original crank windows and want to add power. I might buy an after market kit or try to locate some originals (i'll probably go with aftermarket). Due to the shape of the door I can't figure out where original wire grommets go or where the best place to install aftermarket wiring would be.....Does anyone have a 65 A-body with power windows??? any photos?? I would appreciate any advice
wolf28
08-20-2009, 02:40 PM
subscribed
gtotto
08-21-2009, 06:36 PM
Hey guys,
I have a 65 GTO I am in the process of restoring. I have original crank windows and want to add power. I might buy an after market kit or try to locate some originals (i'll probably go with aftermarket). Due to the shape of the door I can't figure out where original wire grommets go or where the best place to install aftermarket wiring would be.....Does anyone have a 65 A-body with power windows??? any photos?? I would appreciate any advice
anyone?? any advice?
MuscleRodz
08-21-2009, 08:18 PM
There should be a dimple in the door and the jamb which is a drill locating point.
gtotto
08-22-2009, 07:27 AM
There should be a dimple in the door and the jamb which is a drill locating point.
Yes there is a dimple on the body under the push button switch..... I can use that dimple but the dimples on the door itself seem to be in a weird place and I don't know how a grommet/conduit would line up when the door opens and closes.
454ragtop
08-24-2009, 08:26 PM
Added power windows, locks, trunk, etc to my 72 Chevelle conv. All the dimples were there. Probably need to see a car like yours w/power to get an idea of where you should be looking. I remember the rear regulators were way different from the original cranks. Good luck, Jim.
gtotto
08-25-2009, 08:42 AM
Added power windows, locks, trunk, etc to my 72 Chevelle conv. All the dimples were there. Probably need to see a car like yours w/power to get an idea of where you should be looking. I remember the rear regulators were way different from the original cranks. Good luck, Jim.
Thanks,
I have been looking online for door jamb photos with power accessories......no luck yet. I have an assembly manual that is not too clear but looks as if the grommet (or something) goes somewhere to the middle of the door.
parsonsj
08-25-2009, 08:54 AM
Ken, have a look at Electric Life. They are the best... and Frank at Prodigy Customs is a dealer for them.
jp
gtotto
08-25-2009, 12:04 PM
Ken, have a look at Electric Life. They are the best... and Frank at Prodigy Customs is a dealer for them.
jp
Thanks, I'll give em a look
Adam@Autoloc
08-26-2009, 02:36 PM
autoloc makes a good power window kit..pretty reasonable on price.
gtotto
08-26-2009, 02:39 PM
autoloc makes a good power window kit..pretty reasonable on price.
Thanks I'll look em up
for your pic you might try team chevelle www.chevelles.com
gtotto
08-28-2009, 09:19 AM
for your pic you might try team chevelle www.chevelles.com (http://www.chevelles.com)
Thanks
I was thinking the same thing....I'll put a post there
Powered by vBulletin®