Results 1 to 4 of 4
-
08-20-2009 #1
Registered User
- Join Date
- Jul 2009
- Location
- ma.
- Posts
- 386
have a 69 t/a and a set of bullet wheels?
my 69 t/a convert. has a plain set of rallys on it..have a set of mustang bullet wheels they look great in place and the holes look like there off about 1/8 on each stud. has anyone tryed this or can i just slot the hole out counter sink it and bolt them on?..cant even give them away anyway...
-
08-23-2009 #2
Registered User
- Join Date
- Jun 2009
- Posts
- 76
No. Find out what offset or backspacing they are and use a proper adapter.
Kurt Mcmanus
95 Caprice Wagon w/ 234,000+ miles DD! Original 4L60 still hanging on...
http://chiltonmusic.com/ Me:http://myspace.com/thebassplaya34
Co mod in Wheel & Tire section of impalassforum.com
08-24-2009 #3
Registered User
- Join Date
- Sep 2006
- Location
- Southern Indiana
- Posts
- 4,709
Redrill to Ford 5 on 4 1/2 and add in some 3 in wheel studs.
08-25-2009 #4
Registered User
- Join Date
- Nov 2004
- Location
- Dallas Texas
- Posts
- 496
Bullet wheels
your'e meaning redrill the axles and rotors-just wanted to make that clear, he will probably need spacers due to the offset so why not get the bolt pattern corrected by the spacer? seems easier
Originally Posted by MonzaRacer
Rich
69 Trans Am "TireBird"
M6 / LS6 minitubbed DSE Sub
C5 frt LS1 rear disc brakes
https://www.pro-touring.com/forum/showthread.php?t=14992
69 R/S Z28 302
15 Camaro ZL1
90 Formula next project
Reply With Quote
