Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 26
    1. #1
      Join Date
      Aug 2004
      Location
      Holmes Hollow, Ontario Canada
      Posts
      991

      Boss 338 vs Foose3 Nitrous Legend

      Other than the better chrome on the foose rims is there any big differences? Specifically I am wondering about the width of the spokes (look bigger on the foose) and clearance.
      Thanks

      ____________________________________________
      Scott


    2. #2
      Join Date
      Aug 2004
      Location
      Holmes Hollow, Ontario Canada
      Posts
      991
      thats foose not "foose3" - slip of the finger, sorry
      ____________________________________________
      Scott

    3. #3
      Join Date
      Oct 2007
      Location
      Marboro, NJ
      Posts
      297
      If your intersted, I've got a pair of foose nitrous which are 20 x 8.5 that I'm looking to get rid of. That were put on the car for mock up and never drivin on.
      Joe C
      1969 Camaro

    4. #4
      Join Date
      Aug 2004
      Location
      Holmes Hollow, Ontario Canada
      Posts
      991
      Thanks but I'll have to say no.
      ____________________________________________
      Scott

    5. #5
      Join Date
      May 2009
      Location
      Opelousas, Louisiana
      Posts
      3

      bolt pattern

      whats the price on those wheels

    6. #6
      Join Date
      May 2009
      Location
      Opelousas, Louisiana
      Posts
      3

      foose rims

      i have a 71 monty will the rims fit and how much and where are you

    7. #7
      Join Date
      Apr 2006
      Location
      Atlanta GA
      Posts
      7,477

    8. #8
      Join Date
      Aug 2004
      Location
      Holmes Hollow, Ontario Canada
      Posts
      991
      Termin8or, I think that guy wants your rims.
      I looked at the boss and I'm not sure I like the straight spoke 1/2 round end but I knew you loved them Vengeance. Its been a long decision but I'm going with Legends - now for tires, yikes.
      ____________________________________________
      Scott

    9. #9
      Join Date
      Oct 2006
      Location
      Corona, CA
      Posts
      1,948
      Country Flag: United States
      I like the legends because there backspace measurements are better... an 8" with a 5" back, and a 9" with a 5.25" back covers a wide variety of cars.

    10. #10
      Join Date
      Jul 2006
      Location
      Hesperia, CA
      Posts
      29
      I really like the 338's. We just did a set on one of our cars.



      Dale Lee
      Dale's Speed
      www.dalesspeed.com

    11. #11
      Join Date
      Apr 2009
      Location
      Morristown, TN
      Posts
      103
      That is a bad ass elky!

    12. #12
      Join Date
      Apr 2006
      Location
      Atlanta GA
      Posts
      7,477

    13. #13
      Join Date
      Apr 2008
      Location
      Galt, California
      Posts
      115
      What size wheels on that El Camino?

      I like the BOSS wheels. I have a set I am putting on my 1972 Camaro.
      Nelson Parker - Sales Manager @ www.supermuscleparts.com

      CURRENT PROJECTS:
      1968 Pontiac Firebird
      1967 Chevrolet K20

    14. #14
      Join Date
      Jul 2006
      Location
      Hesperia, CA
      Posts
      29
      They are 20 x 8.5 and 20 x 10
      Dale Lee
      Dale's Speed
      www.dalesspeed.com

    15. #15
      Join Date
      Dec 2005
      Location
      South Ga..
      Posts
      288
      any backspace options on the Boss wheels?

    16. #16
      Join Date
      Jan 2008
      Posts
      494
      be carefull with the boss wheels I had to get the end of my rotors turned down because the wheels wouldnt fit over them, then I couldnt use the dust cap I had to rtv the boss cap on. This was on a 67 chevy truck I'm sure pass cars have smaller bearing ends on the rotors but I would check before you buy. Btw the boss wheels look alot better!!!!

    17. #17
      Join Date
      Mar 2008
      Location
      Indiana
      Posts
      250
      Country Flag: United States
      I just picked up a set of black 18x8 and 18x9.5 boss 338's for my 67 Camaro from a vendor in Columbus Oh. His website is jdhwheels.com. Great to deal with and good prices. If interested. And yes they will fit in the rear of a lowered 67 without problems!

    18. #18
      Join Date
      Aug 2004
      Location
      Holmes Hollow, Ontario Canada
      Posts
      991
      Just bought Legends from Jon. Almost as cheap as boss 338s but better looking and better chrome.
      ____________________________________________
      Scott

    19. #19
      Join Date
      Oct 2006
      Location
      Corona, CA
      Posts
      1,948
      Country Flag: United States
      Thanks for the business, we were happy to help. I should have your set ready to ship come Monday.

    20. #20
      Join Date
      Feb 2007
      Location
      Loganville GA
      Posts
      51
      I did 338s evryone asks if the are foose...both rock!
      Attached Images Attached Images    
      Greg
      86 Buick GN, 20"s, 3" drop, TE44 and more
      05 Ram 1500QC dropped 6"+
      06 Stratos 201ProXL Yammie 225..not stock

    Page 1 of 2 1 2 LastLast



    Advertise on Pro-Touring.com