View Full Version : first gen Flip Down Rear Seat
skeeters65
05-25-2009, 11:58 AM
Are all three years the same seat??
What do you need to do to swap a flip down seat into a non-flip seat car??
Thanks
makoshark
05-26-2009, 03:48 AM
67`s had different latches and catches. They weren`t known for keeping the seat back in place under braking. So, they were redsigned for 68-69. You`ll need to remove the 3 hooks at the top of the package tray that secures the backseat top. Then order the lower seat bracket mounts as well as a few other pieces. You`ll also need to locate a fold down rear seat as well. They aren`t reproduced, but it`s not very difficult to find them. Just try to find one for sale that has everything with it.
skeeters65
05-26-2009, 05:16 AM
How much should I be paying for a complete setup??
How do I tell the difference between the 67 and the 68-69??
Thanks
skeeters65
06-03-2009, 05:01 AM
How much should I be paying for a complete setup??
How do I tell the difference between the 67 and the 68-69??
Thanks
Anyone??
makoshark
06-03-2009, 05:13 AM
I`ll get a pic for you so you can tell the difference
skeeters65
06-03-2009, 06:19 PM
That would be great and I would appreciate it..
NOT A TA
06-04-2009, 05:16 AM
This is the one in my 67. Don't know if this will help. Hint, don't leave it down in storage for 20 years!
https://static1.pt-content.com/images/noimg.gif
BonzoHansen
06-04-2009, 05:40 AM
You look for answers for this at camaros.net
texasdvldog
06-04-2009, 02:25 PM
You look for answers for this at camaros.net
ouch :machine:
Powered by vBulletin®