Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8
    1. #1
      Join Date
      Apr 2009
      Location
      Morristown, TN
      Posts
      103

      Can i run 20x10 coy's on a stock 71 camaro

      I am hearing different tales on this. Has anyone had experience running 20x10 C5's on the rear of a stock 2nd gen camaro. I know the 20x8.5 will work but I was looking for a deeper lip. If anyone has a picture with the setup please post for me to look at. Thanks



    2. #2
      Join Date
      Mar 2006
      Location
      Monterey Peninsula
      Posts
      2,150
      tall tire,it'll be tight but will work if you nail the b/s just right...rear seatbelt mounting point on the trans tunnel will have to be massaged with a bfh.
      '67 Buick Skylark GS400 funny car "Ingenue" 8/10 HRM / Gasoline (Swedish) cover & feature 2/12
      World's only Buick-powered Buick Funny Car!
      Used to be known as musclecarjohn

      www.buickfunnycar.com
      http://www.facebook.com/ingenuebuickfunnycar

    3. #3
      Join Date
      Apr 2009
      Location
      Morristown, TN
      Posts
      103
      IYO, is there gonna be much difference than if i go with 8.5's. The cars I have seen with the 8.5's on the rear and factory height look "donk'd" in the back

    4. #4
      Join Date
      Mar 2006
      Location
      Monterey Peninsula
      Posts
      2,150
      I don't like the skinny tall tire look,I had a pair of 20x8's I had on my Chevelle and never liked how they looked so I sold them.
      Stick with your original plan and you can make it work,there are plenty of guys out there running that combo.
      Contact Jon Henson @ www.driverzinc.com for some expert advice,email him @ [email protected]
      '67 Buick Skylark GS400 funny car "Ingenue" 8/10 HRM / Gasoline (Swedish) cover & feature 2/12
      World's only Buick-powered Buick Funny Car!
      Used to be known as musclecarjohn

      www.buickfunnycar.com
      http://www.facebook.com/ingenuebuickfunnycar

    5. #5
      Join Date
      Apr 2009
      Location
      Morristown, TN
      Posts
      103
      I have left 2 messages for Jon about wheels and have not got a call back yet. Coy's are my last choice but I am getting impatient with spring already here and I know i can always use the Coy's on something else in the future. Like the 61, 62, impala I just can't seem to find. I may just pull the trigger on a nice 65 I found but for a little more i think I can find a nice 62. Best deal so far on a nice quality 62 I have found is 22k and 14k for a 65 both are 283 2 speed cars.

    6. #6
      Join Date
      Dec 2005
      Location
      South Ga..
      Posts
      288
      Get the 10inch width more lip the better

    7. #7
      Join Date
      Oct 2006
      Location
      Corona, CA
      Posts
      1,948
      Country Flag: United States
      My wife has been in surgery all day today, so I've been out. I'll be back in the shop tomorrow. 9-5pm.
      Long story short, 10's can fit on the back of a second gen, but the backspace and stance have to be right. Too low and it will rub, too high and it will rub.

    8. #8
      Join Date
      Oct 2006
      Location
      Corona, CA
      Posts
      1,948
      Country Flag: United States
      Quote Originally Posted by 71CamaroSS View Post
      I have left 2 messages for Jon about wheels and have not got a call back yet. Coy's are my last choice but I am getting impatient with spring already here and I know i can always use the Coy's on something else in the future. Like the 61, 62, impala I just can't seem to find. I may just pull the trigger on a nice 65 I found but for a little more i think I can find a nice 62. Best deal so far on a nice quality 62 I have found is 22k and 14k for a 65 both are 283 2 speed cars.
      Back at the shop and checked messages, I have 0 messages from you (?)




    Advertise on Pro-Touring.com