BAER PBR calipers on G-Body - need parts?

[CruizinKev]

Anyone with front 13" Baer brakes on a G-Body over here?

I'm still looking for the rest of parts to use the BAER track PBR calipers on the 1979 monte carlo. What rotors does it use (besides the Baer rotors)? I just searched a bit and saw its saying 13" corvette rotors.. is that right?

Here my calipers btw:






what parts I need to make the PBR calipers fit on my 1979 monte carlo? Seems I need some brackets to bolt them on my front spindles? C4 bracket is that right? Where can I get these missing things??

Thx,
-Kev

[awdvette]

You are going to need a bracket from the spindle to the caliper bracket. I do not know anybody making the brackets yet. I made my own. You also need a hub and corvette 13" rotor.

[Samckitt]

What awdvette said. You might check with Kor3 for parts. The Baer calipers & brackets are just factory Vette PBR calipers that they have machined their name into. So Kore3 may have the bracket you need. Then get their spindle & get some Vette rotors. You will also either have to get special machined spindles, or have some machined.

http://www.kore3.com/

[CruizinKev]

thx guys! I already checked Kore3 - they don't offer any C4 parts at the moment.. but found another good looking site:

http://flynbye.com/catalog/c7_p1.html

[Samckitt]

I just remembered something. I was able to get rear caliper brackets for my rear discs. Have you tried calling Baer to see if they will sell you the brackets / spindles?

On second thought, just checked the above site you had linked & looks like you can get them there.