dusterbd13
02-05-2009, 08:39 AM
rebuilding the front of my truck this weekend, assuming my infant lets me and my UCA's finally show up.
question is on alignment specs.
1 inch drop coils (belltech), ZQ8 sways both ends, Moog problem solver LCA bushings, Tall upper ball joints, tube UCA, , bilsteins, 3 inch drop leaves in the back, mild weight reduction on the front.
dual purpose, autocross and street. tire wear not that much of a concern, but i dont wanna go through a set every 1000 miles.
my thought was .75 neg camber, +5 caster, 1/8 toe in.
any suggestions?
Michael
question is on alignment specs.
1 inch drop coils (belltech), ZQ8 sways both ends, Moog problem solver LCA bushings, Tall upper ball joints, tube UCA, , bilsteins, 3 inch drop leaves in the back, mild weight reduction on the front.
dual purpose, autocross and street. tire wear not that much of a concern, but i dont wanna go through a set every 1000 miles.
my thought was .75 neg camber, +5 caster, 1/8 toe in.
any suggestions?
Michael