Results 1 to 2 of 2
Threaded View
-
12-13-2008 #1
Registered User
- Join Date
- Jan 2008
- Location
- Castro Valley, CA
- Posts
- 530
Help installing master cyl on 68 camaro
Hi,
I have fully shaved my firewall with a new piece of sheetmetal and am now starting to cut out the holes for the brake master cylinder. I bought a 7" booster and was wondering if I needed to cut a large hole where the pushrod goes through the firewall so the rubber boot can fit through the firewall as well or if I only need a bog enough hole for the bolt itself to go through?
Please help as I dont want to cut a giant hole if the rubber portion of the master doesnt come through the firewall. Thanks guys.
John
John S.
68 "Bloodline" Camaro in assembly...
Speedtech Sub, Alston G-Billet/Fab 9 rear, Ridetech coil overs, Moser axles, Fesler 19's, Lots of Anvil parts,Twin tubo LS3/T56, Carbon fiber manifold, and the list goes on and on..........
-
Reply With Quote
