Results 1 to 3 of 3
Thread: '64 Impala Disc/Drum MC Advice
-
03-01-2005 #1
Registered User
- Join Date
- Dec 2004
- Posts
- 33
'64 Impala Disc/Drum MC Advice
I have a '64 Impala that has a disc brake kit on the front and was wondering if anyone here could point me to a good master cylinder for this set up until i come up with the buck to go with a complet four wheel set up.
-
03-02-2005 #2
New to Pro-Touring
- Join Date
- Oct 2004
- Posts
- 61
What size caliper/rotors on front and what size drums/cylinders in the back?
Power booster? What diameter?
03-02-2005 #3
Registered User
- Join Date
- Dec 2004
- Posts
- 33
The system is all stock, rebuilt other than an older eci kit using 84-87 vette components in front. I have power brakes with a stock single master cylinder but will most likely get a newer, smaller booster or hydroboost when I put in my 502. I want to eventually get a full Baer setup, but that will have to wait until the body work is finished. Right now I just want to put on a master cylinder to get the pressure right for a disc/drum combination.
Reply With Quote
