Please Post your cam idle video [Archive]

maldo

09-29-2008, 07:38 PM

I hear a lot of great sounding cars out there but, never see the owners list the type of combo they used so I am trying to get a video thread going of everyone’s comb
Please list your engine combo (size etc) Cam used and the type of exhaust system (please lists the type of muffler and size and whether or not you have a crossover tube etc.
The more detailed the better. Maybe throw in a few revs lol

class67

09-30-2008, 01:32 PM

I'm no videographer by any means but, here is one of my 67. It has a 383 with 9.8:1 compression, 234 dur. / 521 lift, RPM heads, roller rockers, Air Gap manifold with a 750 speed demon, all MSD ignition (pro-billet dist., 6al). Exhaust consists of Hooker Super Comps to 2 1/2" stainless, Dynomax mufflers and dumped over the rear end....no H or X pipe yet.

https://static1.pt-content.com/images/pt/2008/09/th_PICT0136-1.jpg (http://s269.photobucket.com/albums/jj72/class67_photo/?action=view&current=PICT0136.flv)

stage2ROUSH

09-30-2008, 04:03 PM

can I just say NICCCCCCCCCCEEE!! sound ,looks, love your car!!

no bags

09-30-2008, 05:08 PM

Here ya go,

Solid roller. 10.25 cr. .556 lift. 242/252 duration. 1.6 roller rockers. Super Victor intake . 750 Demon.Hooker Super Comps . 3" Flowmaster full exhaust.Oh yea......pump gas

https://static1.pt-content.com/images/pt/2007/05/th_MOV01773-1.jpg (http://s84.photobucket.com/albums/k32/stepupkr8/?action=view&current=MOV01773.flv)

https://static1.pt-content.com/images/pt/2008/10/DSC02008-1.jpg

JustinB

09-30-2008, 06:05 PM

Lets see if this works. 454 BBC 11.1 comp/ratio 292/300 duration and 618/638 lift. Exhaust is 3" with flowmaster 40s. Tried to get my neighbor to rev it up for me but I think he was afraid to get on it.

[/URL][URL=http://s2.photobucket.com/albums/y8/jbutler45/?action=view&current=100_1953.flv]https://static1.pt-content.com/images/noimg.gif (https://www.pro-touring.com/forum/)

class67

09-30-2008, 06:14 PM

that's got a nice crisp sound to it.....I like it!

Steve1968LS2

09-30-2008, 06:37 PM

Open header.. before the accident...

http://www.lateral-g.org/gallery/main.php?g2_itemId=332

With exhaust.. after the accident..

http://www.lateral-g.org/gallery/main.php?g2_itemId=373

DarkoNova

09-30-2008, 07:10 PM

Open header.. before the accident...

http://www.lateral-g.org/gallery/main.php?g2_itemId=332

With exhaust.. after the accident..

http://www.lateral-g.org/gallery/main.php?g2_itemId=373

Before and after are the same video. I remember following this build in PHR though, and it was a shame that it got hit so bad. :guilty:

Matt

Steve1968LS2

09-30-2008, 07:30 PM

Fixed it..

The link and the car! lol

No biggie on the crash.. stuff happens. besides the car is even better now and I have a great story to tell :)

70camaro406

09-30-2008, 08:28 PM

iuyIgo06Liw&hl

ENGINE
406 sbc
Badger hypereutectic flat-tops (10.8 w/ 64cc)
Wheeler sportsman lite 5.7" rods
Scat 9000 cast steel crank (3.75")
Lunati solid roller #50103 - lift .591 .597, dur @.050 250 259
Miller PVS 1.6 roller rockers (makes it .630 .637)
Comp solid roller lifters
Competition Products stud girdle
AFR 210 Comp ported, 100% cnc'd (2.08, 1.60, 66cc chambers - makes it about 10.5:1)
Edelbrock Super Victor
Holley 2" open spacer
Holley chokeless 830 carb
Hooker Super Comp 1 7/8" headers
3 1/2" pipes with Borla 3 1/2" Top Sportsman mufflers
Flowmaster 3 1/2" turndowns

*this video is with the heavy torque converter hanging off the flexplate...when the 5 spd goes in, an aluminum flywheel is going in too.

class67

09-30-2008, 08:35 PM

Steve, what mufflers are those again?

Steve1968LS2

10-01-2008, 06:36 AM

Steve, what mufflers are those again?

Magnaflow with x-pipe

Bow Tie 67

10-01-2008, 07:25 AM

1967 327 .040 over

Single pattern Cam .550 Solid Roller 238 @ .050

2 1/2" exhaust, no cross pipe, 3 chamber Flow-masters, 1 5/8" Hooker

Pay no attention to the A-hole behind the wheel I was crabby that day. :)

F9dOOFA2q9U

GBodyGMachine

10-01-2008, 07:39 AM

<a href="http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=39197604">MMMMM Mufflers</a><br/><object width="425px" height="360px" ><param name="allowFullScreen" value="true"/><param name="movie" value="http://mediaservices.myspace.com/services/media/embed.aspx/m=39197604,t=1,mt=video,searchID=,primarycolor=,se condarycolor="/><embed src="http://mediaservices.myspace.com/services/media/embed.aspx/m=39197604,t=1,mt=video,searchID=,primarycolor=,se condarycolor=" width="425" height="360" allowFullScreen="true" type="application/x-shockwave-flash" /></object>
Umm, 383 Stroker
292/292 @50
.511/.511 lift
110 centerline

Flowtech Headers
3" x-pipe
Dynomax Bullets w/ Dumps

Jeff

Samckitt

10-01-2008, 01:32 PM

Ok so while I was bleeding the brakes I thought I would record it to add to this thread.

Motor: 1995 350 LT1 WITH fuel injection.
11:1 compression
Hooker full length super comp headers
3" duals with X pipe
Flowmaster 40 series delta flow mufflers.
Cam is a Comp Cam 306
.510" / .540" I/E lift
Duration @ .050" 230/244
112 LSA
Ignore junk in the garage.

(It sounds better in person, & filter whistling isn't so bad in person)

<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/8F1ULWZEtpk"> </param> <embed src="http://www.youtube.com/v/8F1ULWZEtpk" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

ZYAL8R

10-01-2008, 01:55 PM

http://videos.streetfire.net/video/1973-camaro_185190.htm
<embed src="http://videos.streetfire.net/vidiac.swf?video=2210bdf3-d079-4faa-97dd-9b1c010745f1" width="428" height="352" allowFullScreen="true" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/><a href="http://videos.streetfire.net/video/1973-camaro_185190.htm">1973+camaro+</a>
383, Lunati Bracket master cam, Flowmaster 2 1/2 with h pipe 40 series mufflers, Hedman headers

minendrews68

10-01-2008, 05:05 PM

Hey Steve, what seats do you have in your Camaro? Sounds nice by the way.
Carl

Zedzag

10-01-2008, 08:28 PM

01 lQ4
crane 228/232 .600/.600 on 112
3" dynomax ultraflows including the tails,no crossover. Edelbrock 7118 carb conversion using holley HP750 carb.
http://www.youtube.com/watch?v=wdgaJU1ly2I
http://www.youtube.com/watch?v=ntV_QEPPM4k

class67

10-01-2008, 08:33 PM

Hey Steve, what seats do you have in your Camaro? Sounds nice by the way.
Carl

They are Corbeau GTS II's

2Bad4Ya

10-02-2008, 11:16 AM

This is was taken before we tore the car down and are doing everything. 327 600cfm street avenger, wieand alum intake with double ump heads, duntov cam, headers and cbomb header mufflers.

It is nothing as nice as these other guys but its a work in progress and hope to squeeze abit more from her in the rebuild phase.

http://www.fquick.com/videos/viewvideo.php?id=3663

hivewax

10-02-2008, 12:53 PM

289 stroked 347. COMP Cams THUMPR SBF cam. 670cfm Holley Street Avenger, EDELBROCK Air-Gap, JBA Tri-Y's, & 10.6:1 compression... MagnaFlow(s) x-over 2.5" not hooked up in this video.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Uo2nGFAdK0A&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/Uo2nGFAdK0A&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>

Steve1968LS2

10-02-2008, 04:04 PM

Hey Steve, what seats do you have in your Camaro? Sounds nice by the way.
Carl

Recaro "SPORT" models.. very nice seats :)

Oh, the cam is a 230/232 112 LSA -- 1 7/8 stepped long tube headers, Magnaflow mufflers with x-pipe.

Z06killinSBF

10-02-2008, 06:23 PM

This is my old 5.0 I sold a while back. I always loved the sound of it ripping through the gears.

5.0 302 9.0:1
Performer RPM intake
75mm maf
Power Pipe
ported E7 heads
B-303 cam (.480/.480 w/ 224/224)
Crane 1.73 roller rockers (makes the cam @ .519 lift)
MAC 1-3/4" long tubes
2-1/2" Pro-Chamber with 2-1/2" stainless straight pipes

https://static1.pt-content.com/images/noimg.gif (http://s9.photobucket.com/albums/a78/Z06killinSBF/?action=view&current=MOV02987.flv)

https://static1.pt-content.com/images/noimg.gif (http://s9.photobucket.com/albums/a78/Z06killinSBF/?action=view&current=MOV02989.flv)

NOPANTS-68

10-05-2008, 12:03 PM

Here's my Nova right before teardown for the winter this morning. This is about a 95% correct replica of the PHR "Ironman" engine they built last year. 468 big Chev, 10.5 CR, ported 990 rect ports, Comp Cams solid roller 252/252 .652 lift, Hooker super comps, all 3.5 in. mandrel bent system , Magnaflow 3.5 in. mufflers, H pipe and terminated at the axle.

<object height="344" width="425">

<embed src="http://www.youtube.com/v/eMaqE4w7gfU&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" height="344" width="425"></object>

Ryanater

10-10-2008, 05:23 AM

468 BBC. 286 Comp Magnum Cam.
http://www.youtube.com/watch?v=iqErVInEVZ0

ky69

10-12-2008, 12:03 AM

deu3AxMWvAc
Not my 69 but it does sound good, only car running atm.

LQ4 with Thunder Racing TRex. 242/248 608/612 110LSA
Pacesetter LT's, 3" true duals with xpipe and Dynomax race bullets dumped.

Chicken Coupe

10-12-2008, 08:50 AM

Here's a boatload!

http://www.chevelles.com/forums/showthread.php?t=169808

Z06killinSBF

10-19-2008, 04:14 AM

The blue car: 289, E7 heads (low compression 8.7:1) Isky 262 super cam, RPM Air-Gap, 600 Edel, long tubes w/ 2-1/2" dumped 2 chambers. This motor is soon to be swapped with a 10.1 solid cammed 351W.

<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://s9.photobucket.com/flash/player.swf?file=http://vid9.photobucket.com/albums/a78/Z06killinSBF/DSCF0167.flv"></embed>

Yelcamino

10-19-2008, 04:03 PM

Ok, here's what I got in the Chevelle...

This info isn't in the opening to the video:
Cam specs - .612” lift, 244* dur @ .050”
Exhaust specs - Stahl stepped headers, 2” to 2.25” primary pipes, 3.5” collectors; 3.5" exhaust w/ Dr. Gas X crossover and Spin Tech Truck/RV mufflers w/ 3.5" inlets and 3" outlets w/ 3" tailpipes out to the bumper.

https://static1.pt-content.com/images/noimg.gif (http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/13%20Oct%2008/?action=view&current=EngineVideo.flv)

01somta

10-19-2008, 05:20 PM

Here is my old 93 mustang right after we finished up the DIY turbo build, 302, trickflow alum. heads, F cam, exhaust 3" down pipe off the turbo.

https://static1.pt-content.com/images/noimg.gif (http://s9.photobucket.com/albums/a91/fish451983/?action=view&current=93lx011.flv)

70camaro406

10-20-2008, 12:17 PM

Krazed

10-20-2008, 02:09 PM

Here's my 68 Barracuda.

The video is mostly correct, but since then I've added edelbrock heads, and changed mufflers 3 times. I'm now running magnaflow XL's and some magnaflow race bullets before hand to quiet it down for the kid. (They're removable).

Either way, still sounds awesome.

<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i19.photobucket.com/player.swf?file=http://vid19.photobucket.com/albums/b193/pc_krazed/CudaIdle.flv">

class67

11-14-2008, 10:17 PM

bump........are there anymore?

Roadrage David

11-15-2008, 02:15 AM

Ok here is mine engine hase 600 miles on it so its still not runn in yet.
462ci injun engine / comp cam xe284 cam /comp cam Magnum roller tip rockers/ 310 cfm edel heads with 2,19 1.77 valves/ T II manifold / 850 aed Holly/ srp forged pistons / eagle 6.8 forged rods / 4.25 eagle stroker crank/ . Termal coated Indian adventure headers 2 inch primarys 3 1/2 colecter/ 3 inch stainless X pipe / 3 inch termal coated Goeligh Exelerator muflers/ 3 inch termal coated rear exaust . 550 hp 577lbs torque http://www.youtube.com/watch?v=BtgHOAzyTbg
http://nl.youtube.com/watch?v=E7x040HruIw

premium67

11-24-2008, 01:39 AM

The Stickman

12-06-2008, 05:52 PM

Here are my vids before and after Exhaust. It's a 350 Olds with a Quadrajet on an Edelbrock intake. Don't ask me what's in it' I don't have any idea. Bought the engine off Ebay for $400. BTW the belt squeel has been fixed. Seeems the Olds engines don't like having all the accessories on one side so I had to put the A/C belt on although it ain't charged yet.

http://www.youtube.com/watch?v=ocZ8_tTMbr0

http://www.youtube.com/watch?v=B2fmZ68ADVI

shortrack

01-02-2009, 07:36 AM

certainly not my cars and not at idle but cool nontheless.....Cup series Richmond 06......Turn it up LOUD

Ranaexcavating

01-03-2009, 08:29 AM

https://static1.pt-content.com/images/pt/2009/01/th_MVI_7773-1.jpg (http://s254.photobucket.com/albums/hh119/jmartorana/?action=view&current=MVI_7773.flv)

alocker

01-04-2009, 06:51 AM

Cam only LY6
364 ci
9.6-1
231/237 .589-.595 112
Pypes 2.5" X-Pipe system
Dynomax Ultra-Flow ovals

http://www.youtube.com/watch?v=wTSjokflI4M

Procharmo

03-01-2009, 11:23 AM

CompCams Part Number: 249-CL12-568-4 or 249-CL12-564-4 not sure which. 1.6 Rockers, AFR competition heads.
SsBy_-Wqvb0

wmhjr

03-02-2009, 06:40 AM

It's not quite tuned or installed yet. Hopefully goes to the dyno this week.

Pontiac 400 block. .035 over, 4 bolt billet caps, 4.25" forged crank, roller cam 246/253, 112LSA .660 lift w/1.65 roller rockers, KRE Aluminum heads @320cfm, 10.8 compression, TII, Custom built 4150 holley, ross pistons, forged ultralight I-beam rods

https://static1.pt-content.com/images/pt/2009/03/th_100_4089-1.jpg (http://s297.photobucket.com/albums/mm210/wmhjr_album/1966pontiac/14-Engine/?action=view&current=100_4089.flv)

https://static1.pt-content.com/images/pt/2009/03/th_100_4086-1.jpg (http://s297.photobucket.com/albums/mm210/wmhjr_album/1966pontiac/14-Engine/?action=view&current=100_4086.flv)

Procharmo

03-02-2009, 09:17 AM

Wicked sound, cam's idle is just right. Well done, I bet your itching to get that back in your car!!!!

maldo

03-02-2009, 06:16 PM

CompCams Part Number: 249-CL12-568-4 or 249-CL12-564-4 not sure which. 1.6 Rockers, AFR competition heads.
SsBy_-Wqvb0

yesss nice!!!! any more video of your car

Procharmo

03-02-2009, 06:37 PM

Yes James,
go here> http://www.youtube.com/watch?v=BeELbPrhCCU

Lenie

03-02-2009, 09:10 PM

kurider

03-02-2009, 09:40 PM

Threads like this build up my motivation to finish my car.

jerrys85iroc

03-06-2009, 07:18 AM

bump...i would like to see some more videos....

PT_79_TA_461

03-06-2009, 11:34 AM

yeah!!! keep the Pontiac engines coming, i like what i hear!!!

protour_chevelle

03-06-2009, 09:43 PM

click on the HD feature, sounds much better.

http://www.youtube.com/watch?v=0gZ6hTZwSI8&feature=channel

Comp cams TU1

b-man

03-06-2009, 10:16 PM

The 455 in my GTO has a pretty big flat-tappet hydraulic cam, 244/252 duration @ .050,.550"/.554" lift. Complete engine and exhaust system specs here:http://forums.performanceyears.com/forums/showpost.php?p=2906275&postcount=19

https://static1.pt-content.com/images/pt/2008/10/DSC01593-1.jpg

A 455 Pontiac can absorb a pretty good-sized cam and still have very good low-end power, this one is shifted at 5200 RPM.

A few of short clips, idling and running it through the gears.

https://static1.pt-content.com/images/pt/2009/03/th_MOV02028-1.jpg (http://s137.photobucket.com/albums/q230/b-man64/Videos/?action=view&current=MOV02028.flv)

https://static1.pt-content.com/images/pt/2009/02/th_MOV02031-1.jpg (http://s137.photobucket.com/albums/q230/b-man64/Videos/?action=view&current=MOV02031.flv)

https://static1.pt-content.com/images/pt/2009/02/th_MOV02037-1.jpg (http://s137.photobucket.com/albums/q230/b-man64/Videos/?action=view&current=MOV02037.flv)

Rickys S/C Z28

03-17-2009, 03:14 PM

wow guys there are some bad ass sounding rides on here!! ill post up mine this is an old video with the P1 and magnflow it now has a D1 and slowmasters on it! LOL
https://static1.pt-content.com/images/pt/2009/03/th_P3300001-1.jpg (http://s132.photobucket.com/albums/q26/Rickyscz28/2000%20CAMARO/?action=view&current=P3300001.flv)
let me know what you think

Motown 454

03-17-2009, 04:13 PM

b-man The car sounds sweet Nice quick shifts from that tranny too

Roadrage David

03-18-2009, 12:43 AM

I alredy placed these in this forum but just incase you havend notishd them
here is my injun http://www.youtube.com/watch?v=LkLQXSygmQM
170 mph drive bij http://www.youtube.com/watch?v=7Dp0PngisVI
the same 170 mph drive bij at 2.43 min http://www.youtube.com/watch?v=pHSi7fBWYBE

Pagani

03-18-2009, 09:51 AM

mac71ss

03-18-2009, 02:18 PM

my 68 camaro project.

https://static1.pt-content.com/images/noimg.gif (http://s89.photobucket.com/albums/k214/mac71ss/68%20camaro/?action=view&current=MOV01930.flv)

Rickys S/C Z28

03-29-2009, 04:20 PM

any one else?

lt1chevelle

03-30-2009, 10:52 AM

ill try and post one of my little LT1 tonight

any one else?

devwil68

04-01-2009, 07:07 AM

https://static1.pt-content.com/images/noimg.gif (http://s250.photobucket.com/albums/gg267/devwil68/?action=view&current=DSCN2861.flv)

lt1chevelle

04-01-2009, 03:25 PM

not the best video but here u go. once i get a better one ill post it up. motor is a 95 lt1 with loyd eeliot 2 heads, gm847 cam,carne gold series 1.6rr,holly TB, 37lb racetronixs injectors all MSD, going though 3in bullet mufflers with an x pipe
https://static1.pt-content.com/images/pt/2009/04/th_000_0785-1.jpg (http://s41.photobucket.com/albums/e267/65lt1chevelle/?action=view&current=000_0785.flv)

BigBlockOlds

04-25-2009, 03:18 PM

Alright, I've been dying to post to this thread but haven't had a running engine until this past week.
Today I finally got the engine sorted out with getting the timing set and couple of other issues ironed out.
Took some video with it open headers.

Engine details:

Oldsmobile 455 bored .060" over (468cid)
Forged 425 crank offset ground to 4.25" stroke
Manley aluminum rods with BBC rod journals
Arias flat top pistons - 11.3:1 compression
Edelbrock aluminum heads with 2.120" intake and 1.710" exhaust valves. Valves are back cut, swirl polished, etc.

Camshaft:

Crane Cams Hydraulic Roller.
242/254 duration @ .050, .595"/.595" lift, 114LS

Offenhauser Super-sonic intake
Kooks 2" primary, 3.5" collector headers

Right now its running a 750cfm Speed Demon and Pertronix HEI but I'll be putting the EFI on it hopefully soon.

Idle @ 900rpm:

https://static1.pt-content.com/images/pt/2009/04/th_MOV000031-1.jpg (http://s105.photobucket.com/albums/m224/FE3X_CLONE/Videos/?action=view&current=MOV00003-1.flv)

Idle @ 900rpm with a couple of revs to 4000-4500rpm:

https://static1.pt-content.com/images/pt/2009/04/th_MOV000041-1.jpg (http://s105.photobucket.com/albums/m224/FE3X_CLONE/Videos/?action=view&current=MOV00004-1.flv)