Connecting LSX to TH350

[pharmd]

What if any modifications or adapters are needed to hook an LSX based engine to a TH350 tranny?

Thanks in advance,

Brad

[Chevy Kid]

There was a great article in last months Car Craft about this subject. Very informative. I don't have the article, I saw a friend's.

Tim

[gearheads78]

Transmission bolts right up you just have to leave one bolt out if I remember right. You either need a special converter with the right input or I have seen a bushing to use on an old style TH350/400 converter

[meenaggie]

From Jesse at SDPC - "If you choose to use your old transmission [for the LS2] rather than a newer electronically controlled transmission you will need a different flywheel setup due to the Crank flange being located closer to the block. We have the flywheel setup you need to use your 400, 350, 700R4 transmissions for $164.99"

See thread below in advertiser's specials (14th post)
https://www.pro-touring.com/forum/showthread.php?t=47065