Results 1 to 4 of 4
-
07-25-2008 #1
Registered User
- Join Date
- Jul 2005
- Location
- florida
- Posts
- 739
anyone running a 700R4 and using a B&M megashifter??
I just had a 700R4 installed and I have a B&M Megashifter. My problem is I cant manually shift it anymore. I had a Turbo 400 and it worked fine with the ratchet shifter... any Ideas???
-
07-26-2008 #2
Registered User
- Join Date
- Mar 2004
- Location
- Mid-Michigan
- Posts
- 2,764
There are a couple of things you need to do to set the shifter up for the 4 spd. Look here and read the instructions. Verify the cable plate is installed correctly on the trans.
http://www.bmracing.com/s.nl/c.72308...&category=6029
MarkMark:
"Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
This my Bad Ast thread...
https://www.pro-touring.com/showthre...roject-Faze-II
This is my Fotki album...
http://astroracer.fotki.com/
07-26-2008 #3
Registered User
- Join Date
- Jul 2005
- Location
- florida
- Posts
- 739
I followed the link and cant find directions, is there somewhere else I can look??
07-27-2008 #4
Registered User
- Join Date
- Jul 2005
- Location
- florida
- Posts
- 739
figured it out, just had to remove one pin on the shifter, thanks for the help...
Reply With Quote
