Brake system with SS and AN Fittings

[65 comet]

Hello all,

I'm looking at using SS and all AN fittings for my brakes. I've done some research and found just about all the parts pieces I need with AN ends.

But I didn't find (or didn't look long enough) proportioning valves and braided lines with AN interfaces. In these areas, do I just get a 45 degree to 37 degree adapter so I can attach my 37 degree hard lines?

Thanks for any input.

George

[Apogee]

AN hoses shouldn't be an issue as most all forms of racing use AN...proportioning valves are going to be 1/8" NPT for most of the adjustable aftermarket units that are available (Wilwood, Summit, etc) or inverted/ISO flares like the OE units. In either case, you're going to need adapter fittings to run AN up to those pieces.

Tobin
KORE3