Results 1 to 6 of 6
Thread: 18 x 10 6.5 BS on 67 Chevelle
-
06-25-2008 #1
Registered User
- Join Date
- Dec 2007
- Posts
- 80
18 x 10 6.5 BS on 67 Chevelle
Hi Guys,
Will a 18 X 10" wheel with a 6.5" Backspace fit the rear of a 67 Chevelle without any modifications? I've searched the board but could not find a concrete answer.
Thank you
-
06-25-2008 #2
Registered User
- Join Date
- Feb 2006
- Location
- Somewhere in the Pacific Ocean
- Posts
- 161
That's a little too much backspace for a stock width rear.
Backspace for a 10" wheel should be 5.5" to 5.75".
Check out this link. There are a few '67's with 10" rears listed.
http://www.chevelles.com/forums/showthread.php?t=126665
06-26-2008 #3
Registered User
- Join Date
- May 2000
- Posts
- 4,151
Have you tried doing some measuring on the car?
Here's what I got when measuring my '66.
Frame to quarter: 12.5"
Wheel mounting surface to frame: 6"
Wheel mounting surface to quarter: 6.5"
10-30-2010 #4
Registered User
- Join Date
- Sep 2008
- Location
- Clayton NC
- Posts
- 25
I have a 10 inch rim on the back of my 67 and the BS is 5 on 5 with a little room to play with and i am running a 295 but it is a 15 inch rim
10-30-2010 #5
Registered User
- Join Date
- Oct 2005
- Location
- Corona, CA
- Posts
- 681
Like 7TSS said, too much bs for a stock rear.
10-30-2010 #6
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
There is a 67 on our site with 315 / 35 / 17 on 17 X 10 with 6" BS, fit perfect.
Reply With Quote
