Results 1 to 3 of 3
Thread: Caliper Finishes?
-
01-24-2005 #1
Registered User
- Join Date
- Sep 2004
- Posts
- 186
Caliper Finishes?
Ok, so I'm cleaning up my Rear LS1 PBR Calipers and brackets I got from Ebay. I scrubbed the suckers pretty clean.
I need some suggestions:
1) For the finish, should I polish, paint, plate or powdercoat? Is one much more advantageous than the other's?
2) For at least 2 of those options, I'm guessing I'd have to dissassemble.
Any instructions out there for how to disassmble the reservoirs? I figure it's not complicated... Do I just pull the cups right out of the reservoir, or?
-
01-25-2005 #2
Registered User
- Join Date
- Apr 2001
- Location
- Miami, Florida
- Posts
- 1,639
Looking for info also..
My Baer calipers are going to need some cleanup before install as well and I was wondering the same things!
Kevin.
69 Firebird "Eternity"
01-25-2005 #3
Registered User
- Join Date
- Nov 2000
- Location
- O-town
- Posts
- 4,330
Paint
I heard the Dupli-color caliper paints work good, or you can tear them down and have them powder coated, I think I'm just going to paint mine, I have C5 calipers that someone painted yellow, I think a Semi-black or red might look good, Check them out most parts places will have the paint or Eastwood, I saw something in there today, hope that helps, Steve
Reply With Quote
