dioismyhero
01-14-2008, 09:03 AM
after months of research i found a wheel tire combination i like (budget included) i wanted 17 inch wheels but i didnt want really low profile tires, this is what i came up with! i figured some one could find it helpful for project!!!
this is my project....
Car: 1972 chevelle ss clone
Wheel Make: american eagle
Wheel Model:211
Front Size:17x8
Front Backspace: 4 inch
Rear Size:17x9.5
Rear Backspace: 5.5 inch
Front Tire Size:255.50.17 nitto 450
Rear Tire Size:275.50.17 nitto 450
Suspension mods: stock big block moog springs stock rear springs
there is no motor or trans or hood so its sits high in the front, and the car is on jackstands on the drivers side so its not level
https://static1.pt-content.com/images/pt/2008/01/chevellewheels1-1.jpg
https://static1.pt-content.com/images/pt/2008/01/chevellewheels2-1.jpg
this is my project....
Car: 1972 chevelle ss clone
Wheel Make: american eagle
Wheel Model:211
Front Size:17x8
Front Backspace: 4 inch
Rear Size:17x9.5
Rear Backspace: 5.5 inch
Front Tire Size:255.50.17 nitto 450
Rear Tire Size:275.50.17 nitto 450
Suspension mods: stock big block moog springs stock rear springs
there is no motor or trans or hood so its sits high in the front, and the car is on jackstands on the drivers side so its not level
https://static1.pt-content.com/images/pt/2008/01/chevellewheels1-1.jpg
https://static1.pt-content.com/images/pt/2008/01/chevellewheels2-1.jpg