jrb56
01-04-2008, 01:43 PM
Been active over at Chevelles.com for some time, just getting into gear here.
Thought I would say hi, and post a few pics of my ride...
Since this picture was taken, I have moved to 17x8 front Wheels and 18X10 rear, with Nitto radials. plus a Covans dash with a complete selection of Autometer Cobalt Guages
I have also added Koni shocks, Eibach springs, and UMI upper rear control arms.
The car has a 454 with 990 heads, solid roller cam and a Edelbrock RPM shiny manifold. I added a TKO-600 in august, as well.
I am having the 12 bolt narrowed by 2 inches next week, and will be running Touring Classics C5 brakes front and rear. At the same time I am rebuilding the front suspension with DANA components...
Future plans include working over the body and paint, possible 496 short-block and EFI.
Thanks for listening
Joe
Thought I would say hi, and post a few pics of my ride...
Since this picture was taken, I have moved to 17x8 front Wheels and 18X10 rear, with Nitto radials. plus a Covans dash with a complete selection of Autometer Cobalt Guages
I have also added Koni shocks, Eibach springs, and UMI upper rear control arms.
The car has a 454 with 990 heads, solid roller cam and a Edelbrock RPM shiny manifold. I added a TKO-600 in august, as well.
I am having the 12 bolt narrowed by 2 inches next week, and will be running Touring Classics C5 brakes front and rear. At the same time I am rebuilding the front suspension with DANA components...
Future plans include working over the body and paint, possible 496 short-block and EFI.
Thanks for listening
Joe