moser m9 in a-body

[greg70ss]

Has anybody put a new m9 moser in a chevelle or other a-body? I wanting to purchase a 9inch, m9 or another manufacture, but was wondering on the fitment of moser or anyone else. Does everything align up properly for the upper and lower arms? Looking for a quality actual bolt in for HIGH horsepower, any opinions?

[Blown353]

I've put a couple of bolt-in Alston Fab-9's in 66-72 A-bodies.

They actually did bolt in, one of the very rare times a "bolt in" aftermarket part really does so.

Only thing I had to rig up was brake line brackets.

If you run full tailpipes and buy the optional housing backbraces the exhaust clearance gets real tight right at the corners of the gas tank.

[ProTouring442]

I put a Currie 9" in my 442. Everything bolted right up when it comes to suspension, so I wouldn't expect too many problems there. You'll have to figure out brake lines and hoses, but as there are lots of brake kits available for them, you shouldn't have any other problems.

Shiny Side Up!
Bill

[ProdigyCustoms]

We have sold them, plenty of them, they fit just like factory.