Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      May 2005
      Posts
      394

      Aftermarket seats interference

      Will the Summit, Jegs, or Arizen seats interfere with my factory 67 Camaro console?

      Is anyone running this combo?

      Are you smellin what I'm steppin in?
      http://www.fquick.com/ertoys


    2. #2
      Join Date
      Feb 2005
      Location
      SouthTX
      Posts
      1,233
      Country Flag: United States
      Mine did in my 69, but your 67 console is different so I would not know the results. I have Arizens. It was a price worth paying for better seats, I had the wider bottoms installed as well and that could have been the reason.

    3. #3
      Join Date
      May 2005
      Posts
      394
      Ok, that beimng said, does anyone know the measurement of the rear width of the 69 console?

      That way I can measure it against my 67 console and go from there.

      Thanks,
      Ed
      Are you smellin what I'm steppin in?
      http://www.fquick.com/ertoys

    4. #4
      Join Date
      Feb 2005
      Location
      SouthTX
      Posts
      1,233
      Country Flag: United States
      4.6 inches wide at rearmost, 8.25 inches wide across the lower part of the center bezel, 10.5 inches wide across the center of the shifter opening.

    5. #5
      Join Date
      May 2005
      Posts
      394
      Quote Originally Posted by 4MuscleMachines
      4.6 inches wide at rearmost, 8.25 inches wide across the lower part of the center bezel, 10.5 inches wide across the center of the shifter opening.
      Thank you very much!
      Are you smellin what I'm steppin in?
      http://www.fquick.com/ertoys




    Advertise on Pro-Touring.com