9 inch width with 18x12 Help

[Kevin]

I need to know what width to narrow my 9 inch to run 18x12 with 335 or 315 tires and 4.75 backspace. I have a 69 Camaro with DSE 3 inch mini tub kit instaled. I want tires under car as much as possible so car can sit down over tire. For that reason should I go 315x35x18 or 335x30x18. I want to sit car low . I cant order my moser axles until I figure out housing. Iam going to run rear disc. Any help is greatly app. Thanks, Kevin

[Vegas69]

You need to mock it up with your wheels and measure it.

[LMDGUY]

You need to mock it up with your wheels and measure it.

thats what I had to do with the falcon

[astroracer]

That's the best advice you can get. Get your wheels and tires first so you know EXACTLY what you're working with and then mock them up and measure.
I never cut or order a housing until the actual rolling stock is sitting in the garage.
Mark

[Kevin]

My problem is I can not make my mind up on rims. I have some now that I can use for time being. I have no axles or rear disc yet just a 52 inch wide 9 inch housing and needed to be able to move car. I see where you are coming from and that is the right way of doing it. I was just wondering what the 9 inch widths have been on 69 camaros with DSE kit. I think with 4.75 BS 52'' is to wide. Thanks for the help. this has been a great board for learning. Kevin