Which intake?

[67cam]

I am puting a 427 into a 67 camaro. I know I will have clearence problems with the hood so I am going with a low rise intake. My 427 is basicly stock with a 280 magnum cam and demon 750. I am more interested in low to mid range then (6000 tops) high range. I have oval port heads. What intake should I use?
TorkerII or the performer or any other suggetions. :machine:

[Goatman]

If they make an air gap for the BB's, then that's what I would use. If not a Performer or Performer RPM...

[Lowend]

The Edelbrock torker is the shortest intake you can get

[Adam's 55 Chevy]

Torquer II is old tech. Go with a performer RPM IMO.

[Lowend]

If it'll fit the RPM is a better intake no doubt...