Results 1 to 4 of 4
Thread: C6 Z06 rears on a 9"
-
12-20-2006 #1
Registered User
- Join Date
- Aug 2004
- Location
- Phoenix, AZ
- Posts
- 46
C6 Z06 rears on a 9"
I know that this is possible, but I can't find the brackets that I need to make it work. I'd like to use the drum parking brake too if that is possible. Does anyone know who would have these brackets?
Oh yeah, it's a big ford bearing hub.1969 Olds 442 convertible; 455 th400 sable/gold
2006 Pontiac GTO: cammed LS2 T56 blue/blue
1968 Chevy Camaro coupe: cammed LS7 T56 C5 subframe DSE 4 link, etc. rallye green/parchment
-
12-20-2006 #2
Registered User
- Join Date
- Apr 2006
- Location
- St. JACOB ILLINOIS (ST LOUIS AREA)
- Posts
- 75
not sure
not sure if this will help but for my 98 Z28 I had a local rearend guy cut the for flanges off and install new gm flanges. This allowed all my brackets and everything to bolt right on. He is REAR GEARS in Missouri his name is danny miller. If that helps at all
01-05-2007 #3
Registered User
- Join Date
- Jan 2007
- Posts
- 97
Check out Kore3 at http://kore3.com - I talked to Tobin there last week and he had all the brackets for C5 & C6 (Z06 too) on a ford rear.
Eric
01-05-2007 #4
Registered User
- Join Date
- Jan 2007
- Location
- A house
- Posts
- 20
You can use a stock F-body park-brake setup just redrill the 4 holes and have the center opened up to a little bigger than the for bearing so you can slide the axle in and out.. I have done this but its hard for me to explain exactly how.
Reply With Quote
