Aiight, Lets see your favorite LOWEST and SLAMMED rides.. post up!

[wiedemab]

This is a little off topic, but Boilermaker - do you know what the tolerance on I-beam like you built your chassis jig out of is? I'm just curious more than anything. I'm sure it is well within the typical mfg. tolerances of a vehicle. At some point I'd like to build a chassis jig similar to this and I'm trying to figure out what the best material to use it - I-beam, rectangular tubing etc.

The Challenger is starting to shape up!

[fletcherscustoms]

no clue at all!! You can tweak it easier than probably square or rectangle tubing. It wants to twist a little on the lift. After this car I am building a new table with 2x4 .25 wall tubing rails

[scotzilla]

not pro touring but low
https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

my new daily driver but not for long with gas prices the way they are

[millerhotrods]

https://static1.pt-content.com/images/pt/2008/04/DSCN3719-1.jpg im biased haha

[95IMPALASS]

Heres my controbution

https://static1.pt-content.com/images/pt/2008/04/18slammed-1.jpg

[Memphis]

Nice ps :p those wheels look nice on it

[HectorM52]

https://static1.pt-content.com/images/pt/2008/04/DSCN3719-1.jpg im biased haha
Nice Chevy II. One of my new favorites.

[Memphis]

Some pics I came across that I dig not all PT but we're car guys we can look past that right? :woot:
https://static1.pt-content.com/images/pt/2008/04/rannn-1.jpg
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
:eek:
https://static1.pt-content.com/images/pt/2008/04/konradshot3-1.jpg

[shortz]

That falcon is going to do the power tour eventually, its getting built in australia at the moment, alot of awesome engineering in that car, originally a right hand drive car but being built left hook pretty much specifically for the power tour as far as i know. Cant wait to see the finished project

[compos mentis]

Not mine.

Skip

https://static1.pt-content.com/images/noimg.gif

Brizio's 55

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

From ebay recently...
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

[shmoov69]

Ohhh, that falcon wagon and the vw truck are both baaad!!

[Bruning Auto Design]

coilover car - 5" at ride/drive height at the front of the rockers (lowest point of body and chassis w/different oil pan)...

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

[muthstryker]

omg, bruning auto.. that CHALLENGER is baaaaaad WOW!



PS. My bad was all doped up (well still am) when i saw this..

[Mr.VENGEANCE]

challenger..


..bad ass..

[shortz]

22's on rear? just clearcoat that thing

[Memphis]

Seriously it would be a shame to paint over that.

[John McIntire]

I love that vdub!

[DVierstra]

https://static1.pt-content.com/images/pt/2008/04/P4210010-1.jpg


Nice car!!

The guy (known as Jethro) That owns this Brookwood lives in BC Canada. I did his car last year before he finished it.
https://static1.pt-content.com/images/pt/2007/10/71797_y3Er2NtCOGZPIGcIoZbxCWRSm-1.jpg

All Vector illustration.

[Bruning Auto Design]

22's on rear? just clearcoat that thing

19's and 20's... you're not the first to suggest the clearcoat idea...

:)

[compos mentis]

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

Work in progress...

DonV's handiwork below gave me an idea for an ex-gasser turned 'kustom' mounted on a pro-touring chassis ... after he 'lowered' this skyscraper.
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

Skip

[WS6]

oh man that VW is awesome. I love the Torino with the suicide doors too.

This thread is great. I'm a huge fan of low riders, 50's cruisers, and lead sleds. Very cool.

[no bags]

6cyl , 3speed column shift. Bone stock except for bags and 17's

https://static1.pt-content.com/images/pt/2008/04/lowcamino-1.jpg

[mac71ss]

seen this at rod run this past weekend
https://static1.pt-content.com/images/noimg.gif

[shortz]

I love the Torino with the suicide doors too.


Its actually an ozzie built falcon

[compos mentis]

https://static1.pt-content.com/images/pt/2007/12/groovyrollinblackvettec3-1.jpg
https://static1.pt-content.com/images/pt/2008/04/groovyjay34drrryard-1.jpg
https://static1.pt-content.com/images/pt/2008/04/groovyjay34drfryard-1.jpg
https://static1.pt-content.com/images/pt/2008/04/1971Corvettesilverrestomodragtopdrs-1.jpg

Skip

[silverdenali22]

Here is my truck.
https://static1.pt-content.com/images/noimg.gif

[Memphis]

Check out this convertible snow plow :)
https://static1.pt-content.com/images/pt/2008/04/239176-1.jpg

[Greg from Aus]

[quote=Bruning Auto Design]coilover car - 5" at ride/drive height at the front of the rockers (lowest point of body and chassis w/different oil pan)...

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
Could you please let me now what wheels they are,
Thanks.

[monza]

challenger..


..bad ass..


X2 = ...really bad ass..

[ACEFOOTER]

Shot taken at ride height, air ride on all four corners.

[shortz]

are they some of the new intro wheels on that acefooter?

[John McIntire]

Damn! Thats ride hight??? Looks great, what else have you done besides the air bags?

[Regan]

Bruning Auto, that's quite possibly the coolest Challenger I've ever seen.

Love the VW and the 'Vettes as well.

[Bruning Auto Design]

[quote=Bruning Auto Design]coilover car - 5" at ride/drive height at the front of the rockers (lowest point of body and chassis w/different oil pan)...

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
Could you please let me now what wheels they are,
Thanks.

Enkreuz... linky in sig line.

[chicane67]

You did say low...

https://static1.pt-content.com/images/pt/2007/08/IMG_0311-1.jpg

https://static1.pt-content.com/images/pt/2007/08/IMG_0312-1.jpg

[shortz]

we had a rat rod like that at the beach hop this year, it must have had hydraulics as it could put the frame on the ground and lift the wheels off the ground, or just on if he wanted to do a on the spot burnout with stuff all revs and definately not moving, was something different thats for sure, although the body was so low he couldnt have a roof so just cut it open and stick your head out

[HRBS]

Our Bagged 64: 3 inch rocker height slammed
https://static1.pt-content.com/images/noimg.gif

Our Bagged 69 Mustang Vert.
https://static1.pt-content.com/images/noimg.gif

My fabricators 55: 4 inch rocker height (RIDE HEIGHT.... NO BAGS)
https://static1.pt-content.com/images/noimg.gif

[mburrow]

Mr. V, here's my 70, had since high school in 75. Not as low as some, the others are awesome too.
Hotchkis TVS, Global West upper & lower control arms. Had to cut 1 whole coil off front springs. Hope ya'll like it. No sponsors, just hard work with a lot of friends. Be blessed, ya'll. Mark in Texas
<a href="http://s303.photobucket.com/albums/nn152/markburrow/?action=view&current=rightsidelow.jpg" target="_blank"><img src="http://i303.photobucket.com/albums/nn152/markburrow/rightsidelow.jpg" border="0" alt="Photobucket"></a>

[shmoov69]

buddie's Dodge again!

[gionni]

my bagged road runner...(alterktion on front and modified airbar rear)...

https://static1.pt-content.com/images/pt/2008/05/PICT5875-1.jpg
https://static1.pt-content.com/images/pt/2008/05/PICT5877-1.jpg
https://static1.pt-content.com/images/pt/2008/05/PICT5880-1.jpg
https://static1.pt-content.com/images/pt/2008/05/PICT5863-1.jpg

[WS6]

I like that color.

[staged67gspwr]

Just out of curiosity how many of you guys get inner wheel rub when cutting the wheel all the way?

Thnks

[staged67gspwr]

Heres my ride,and yes i rub when i cut the wheel,lol

[WS6]

Love those Buicks.

[class67]

This one is nowhere near pro-touring, but it is pretty cool none the less. It is my father-in-laws car...he's kind of a pimp, LOL!!

https://static1.pt-content.com/images/pt/2008/05/CopyofPictureorVideo005-1.jpg

[staged67gspwr]

Love those Buicks.




:twothumbs :twothumbs

[Munster]

Sweet caddy. ^

[WS6]

pro-touring isn't in the title of the thread. Any slammed ride is allowed. That VW van was awesome.

[compos mentis]

https://static1.pt-content.com/images/noimg.gif

[compos mentis]

https://static1.pt-content.com/images/pt/2008/01/55Fordblackslammeddr34fr-1.jpg
https://static1.pt-content.com/images/pt/2008/01/55Fordblackslammed34rrdr-1.jpg
https://static1.pt-content.com/images/pt/2008/05/032208CoolCruise592vi-1.jpg

[GAS455]

Here are some more pics of Adams car....and the last car he built.



Some pics I came across that I dig not all PT but we're car guys we can look past that right? :woot:

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
:eek:

[WTRacing]

I love slammed rides. I really like both bagged and unbagged rides equally though.
Here are a couple pics of my buddy Josh's truck. It is bagged and bodydropped with 22's and 24's.
It has a full custom chassis built by Eric and Chris at The Little Shop of Horrors in Lawrenceburg,TN.
More of their work can be seen at friendlychopshop.com along with a small video of this truck dragging
https://static1.pt-content.com/images/pt/2006/12/1357532736_l-1.jpg
https://static1.pt-content.com/images/pt/2006/12/newstuff024-1.jpg

heh, I know Josh lmao nice

[crafty]

This is my Ultima GTR with a magnacharged LS2 by Schwartz.

I love this rear shot mid build. As you can see from the relationship between the wheels, intake and rollbar... this thing is low.

When you're sitting in it, your eyes are level with the door handles of small cars and your ass is about 7" off the ground


https://static1.pt-content.com/images/pt/2008/05/y1p_6jiAQ3MIg4ncWaQFY4uMEjyYwtAqkvIU5zrU-1.jpghttps://static1.pt-content.com/images/pt/2008/05/y1p_6jiAQ3MIg4OZAEWDXAFt1jV2tvIEYqX1Hr1c-1.jpg

[WS6]

looks great crafty. Where in this great big yet seemingly very small world are you located?

[crafty]

Hong Kong

[WS6]

amazing. Maybe one day I will make it over to that part of the world for a visit.

[greencactus3]

https://static1.pt-content.com/images/noimg.gif
our formula car is lower....
your ass is clearing the ground by just over an inch
inch of ground clearance and then a couple plys of carbon and kevlar

[PRO 48 Fleetline]

https://static1.pt-content.com/images/pt/2008/06/Hood010-1.jpgMy 48 fleetline in mock up yet!
https://static1.pt-content.com/images/pt/2008/06/Game178-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Game165-1.jpg

[Fesler built]

I like them low where they can still drive, this car can run 80 on the freeway till I hit a bump

https://static1.pt-content.com/images/pt/2008/06/Img0005-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0010-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0009-1.jpg

[Fesler built]

If we are going to talk low here you go, it just cant go any lower, that is a 22X12.5 on the rear and it tucks almost half of it with a huge dish

https://static1.pt-content.com/images/pt/2008/03/Img0036-1.jpg
https://static1.pt-content.com/images/pt/2008/03/Img0085-1.jpg
https://static1.pt-content.com/images/pt/2008/03/Img0075-1.jpg

[Fesler built]

How about a 49 Merc that sits on the ground. We custom made the FS 903 wheel just for this car

https://static1.pt-content.com/images/pt/2008/05/Merc2-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Merc1-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Merc3-1.jpg

[Young Gun]

How about a 49 Merc that sits on the ground

https://static1.pt-content.com/images/pt/2008/05/Merc2-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Merc1-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Merc3-1.jpg

saw that in superrod a while back...fell in love with it

[Fesler built]

I know this dosnt really fit the site but we build everything low, here is a S600 Brabus we just finished on 22-inch wheels

https://static1.pt-content.com/images/pt/2008/06/Img0028-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0041-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0064-1.jpg

[Fesler built]

How about a brand new Alpah H1 Hummer, we air bagged it so it would ride like a cadi and not a tank. Has about 10-inches of lift

https://static1.pt-content.com/images/pt/2008/06/Img0263-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0257-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0260-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0275-1.jpg

[72sam]

One of my favorites:
https://static1.pt-content.com/images/pt/2008/01/17521590591-1.jpg



WHOS car is this? This would be amazing with a few tweaks.:cool:

[woody80z28]

WHOS car is this? This would be amazing with a few tweaks.:cool:

Tommy England (67lemanster) of NastyZ28. If you come to Carlisle this weekend you can meet him in person. haha

[BritishGreen68]

https://static1.pt-content.com/images/pt/2008/05/Merc2-1.jpg
I want those wheels. 18x8" for my camaro!

[69rs]

Chris, y'all do some good work!

A few from Goodguys.

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

[69rs]

A few more.

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

[69rs]

And more.

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

But, the thread said "your favorite"....

https://static1.pt-content.com/images/pt/2008/06/IMG_0571-1.jpg

She's not all that low, but she's my baby!

[Memphis]

NIICE!! I love the drop top Impala vert and the silver caddy

[dcozzi]

:headbang: Ultima GTR is sick.

[Gordz32]

Here's a couple of the newest pics. The car is pretty much done just working out some little issues Enjoy

[gionni]

looks awesome your chevelle!!!!

[tones2SS]

Gordz, your Chevelle is absolutely stunning.
Grear looking car with great stance. NICE JOB!!!:headbang: :bananna2:

[Steve1968LS2]

Hey, thanks for posting the picture Chris. I wonder if I have the lowest, drivable, 68 Camaro not on Air? I was working on it yesterday and realized how low I have it set. lol

Oh, and Chris's Chevelle is :drool:

[DVierstra]

That is a awesome '68!!

Here's one I conceptualized and finished it in Photoshop...
https://static1.pt-content.com/images/pt/2008/06/71797_89GquKLrFGsZemO2PHka6P6aD-1.jpg

I wouldn't mind building it myself!

[PRO 48 Fleetline]

My 48 Fleetline still in mock up!
https://static1.pt-content.com/images/pt/2008/06/Game167-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Game178-1.jpg
https://static1.pt-content.com/images/noimg.gif

[BritishGreen68]

bump

[shmoov69]

Cool! What are you powering it with?

[ENHANCED AIR RIDE]

Hello all im new to this forum and love it! Heres some of our latest rides that may appeal to you. Currently building a 87 MC that should be real nice!
My own current project is a 60 Impala vert LS6/6spd, C5 frt, Baer rear, full air ride with Coilover shock bodys.
Enjoy

[ZZ430]

Recently completed this 67 Chevelle

https://static1.pt-content.com/images/noimg.gif

Air Ride Street Challenge system.

https://static1.pt-content.com/images/noimg.gif

[warped]

Not pro touring,but more drive it everywhere beat the snot out of it and have as much fun as you can at 4mpg...
My buddy's call it the airplane because of a mishap with some train tracks at a car show at SummitRacing last summer,so now with the new airride tech it's just simply AIR/PLAINhttps://static1.pt-content.com/images/pt/2008/06/attachmentphpattachmentid140d1214525484-1.jpg

[hotrodgary]

Certainly not the lowest.. but I'm partial to it:headbang:

https://static1.pt-content.com/images/pt/2008/06/DSC00999-1.jpg

https://static1.pt-content.com/images/pt/2008/06/DSC01000-1.jpg

https://static1.pt-content.com/images/pt/2008/06/DSC011151-1.jpg

[jdsfastgn]

I'm a little late, and I would like to lower the back about 1" more, but here are some pics of my GN. It has QA1 coilovers up front and moog A body springs in the rear. https://static1.pt-content.com/images/pt/2008/06/Picture343-1.jpg
https://static1.pt-content.com/images/pt/2008/07/Picture3451-1.jpg
https://static1.pt-content.com/images/pt/2008/07/Picture3531-1.jpg

[BritishGreen68]

bump

[carterhickmandesigns]

Here is my current ride. 47 Ford convert not PT but it is mine and I dig it. I wanted a fat convertible for MANY years, just ask KennyD. Notice that as low as it is that you can still see daylight under the chassis. Nothing hangs down.

https://static1.pt-content.com/images/pt/2009/07/47_3-1.jpg

https://static1.pt-content.com/images/pt/2009/07/47_2-1.jpg

[Shiro666]

This is my DD '05 WRX Limited. I have it lowered on H&R springs at the moment, but will hopefully be adding some coilovers. Some camber and a fender roll and I think I can fit some 255's on all four corners. It is pretty low.
https://static1.pt-content.com/images/noimg.gif

[2008fx4]

im biasesd:

https://static1.pt-content.com/images/pt/2009/07/FDriver-1.jpg

[70chevelle406]

What wheels are these?


https://static1.pt-content.com/images/pt/2008/04/wheels12-1.jpg

[1offwizard]

This is my latest project.

https://static1.pt-content.com/images/pt/2009/07/tahoe-1.jpg

[Forgeline 1]

What wheels are these?


Those are the Forgeline SP3P. Looks like a polished lip and black powder coated center.

[70chevelle406]

Those are the Forgeline SP3P. Looks like a polished lip and black powder coated center.


Thanks I had a feeling they were, I just coulnt make out the cap logo!

Vince

[thetoystore]

https://static1.pt-content.com/images/pt/2009/06/rivercamaro037-1.jpg
EXCESIZ is pretty low. bottom of the rock is 3" off ground when air'd out

[thetoystore]

https://static1.pt-content.com/images/pt/2009/07/rosss002-1.jpg
not the lowest by far but another project in my shop

[spaghettio]

94 caprice wagon lt1 sold it

https://static1.pt-content.com/images/pt/2009/07/52-1.jpg
https://static1.pt-content.com/images/pt/2009/07/42-1.jpg

[impalatpi66]

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

[compos mentis]

im biasesd:

https://static1.pt-content.com/images/pt/2009/07/FDriver-1.jpg

With good reason...awesome!

[compos mentis]

I wanted a fat convertible for MANY years,

https://static1.pt-content.com/images/pt/2009/07/47_3-1.jpg

https://static1.pt-content.com/images/pt/2009/07/47_2-1.jpg


Fat is good...:1st:

[1offwizard]

im biasesd:

https://static1.pt-content.com/images/pt/2009/07/FDriver-1.jpg
Wow! That is awesome! Specs on the tires and wheels? Thanks!

[2008fx4]

Wow! That is awesome! Specs on the tires and wheels? Thanks!

forgeline sp3p gray centers polished lips.
19X10 - Front Wheels
20X12.5 - Rear Wheels
Michelin Pilot Sport 285/35/19 - Front Tires
Michelin Pilot Sport 335/30/20 - Rear Tires

[The Stickman]

Here's mine. I am right about 5 inches at teh rocker panels and no scrapes. The rear needs to come down about another inch or so.
https://static1.pt-content.com/images/pt/2009/04/100_3661-1.jpg

https://static1.pt-content.com/images/pt/2009/04/100_3639-1.jpg

https://static1.pt-content.com/images/pt/2009/04/100_3651-1.jpg

https://static1.pt-content.com/images/pt/2009/04/100_3734-1.jpg

https://static1.pt-content.com/images/pt/2009/07/100_3647-1.jpg

[dannyuscg]

I know it's a Nissan but it's powered by a 6 liter LS3 and will outrun most of the stuff posted in this forum.

I have done 3 of these swaps for guys I know here in the Panhandle. I must say that the products Painless wiring offers it makes the swap real easy.

[progoat]

This is my buddys old s-10 before he sold it.
https://static1.pt-content.com/images/pt/2009/07/DSC05883_sized-1.jpg
https://static1.pt-content.com/images/pt/2009/07/DSC05881_sized-1.jpg

[HectorM52]

NICE!!

I've always wanted a double-cab S10.

[crafty]

Jeff Schwartz's 1000hp Twin Turbo Ultima. I drove this from Racine to South Bend on Power Tour this year..... I used to think my 580hp Magnacharged Ultima was fast... Jeff's is a whole new level of insanity.

Its quite well behaved at low revs, but when it comes on boost you'd better be holding the wheel tight.

It does 50-100 faster than the sphincter muscle can slam shut... which is why some passengers crap their pants.




https://static1.pt-content.com/images/pt/2009/07/DSC007971-1.jpg?t=1248995215

[Munster]

It does 50-100 faster than the sphincter muscle can slam shut... which is why some passengers crap their pants.

Ah......sudden uncontrolled bowel evacuation, prior to full sphincter clamping pressure being applied for feices control . (sp)




https://static1.pt-content.com/images/pt/2009/07/DSC007971-1.jpg?t=1248995215 Ahh

[67speedfreak]

heres mine.

https://static1.pt-content.com/images/pt/2009/07/IMG_5432-1.jpg

[67speedfreak]

BTW there are some sweet lookin rides in this thread !

[MIGOAT]

Thanks guys for posting the Pics!!!! The cars look awesome .
You have all helped my obsession. My wife just depleted her account to support my cause.
Elymar is getting Air Ride set to be ready for Rod Run...

[camaro2nv]

Just to give the thread a bump. My buddies car, it will never be finished so I might as post it like this.
https://static1.pt-content.com/images/noimg.gif

[dannyuscg]

I must say I would get me an old mans golfing hat and pimp that Caddy.

JMO, Danny

[camaro2nv]

I have to admit I would also. But after I cut and buffed it I dont want to see it for another year!lol

[Hot Rod]

Customer's Cars

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/pt/2009/08/interors_by_shannon_JPG-1.jpg
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/pt/2009/08/P627041820Small-1.jpg
https://static1.pt-content.com/images/pt/2009/08/nadine_pictures_hot_rod_goodguys_show9-1.jpg
https://static1.pt-content.com/images/pt/2009/08/1954_chevy_interior_air_ride-1.jpg
https://static1.pt-content.com/images/pt/2007/04/large_coast_to_coast2-1.jpg

[Hot Rod]

My Buick
https://static1.pt-content.com/images/noimg.gif

[Draginutz]

https://static1.pt-content.com/images/noimg.gif

[BritishGreen68]

now that looks good:enguard:
https://static1.pt-content.com/images/noimg.gif

[tones2SS]

now that looks good:enguard:
https://static1.pt-content.com/images/noimg.gif

I agree. Looks killer. Any spec's on that bad boy?

[Tukn]

63 belair 18x7 and 20x10 boyds, this was my second car.
https://static1.pt-content.com/images/noimg.gif[/IMG]

and this is my near completed truck.
https://static1.pt-content.com/images/noimg.gif[/IMG]

https://static1.pt-content.com/images/noimg.gif[/IMG]

[Ash]

TUKN... The lower lip on the inner tailgate is a really fresh touch. Do you have a rear-facing shot of the bed with it closed?

[Tukn]

yea i do mate, i'll throw in some extra ones just of the metal work in the tubs, front and rear.

https://static1.pt-content.com/images/noimg.gif[/IMG]

https://static1.pt-content.com/images/noimg.gif[/IMG]

the small recess in the tub was to clear the brake booster
https://static1.pt-content.com/images/noimg.gif[/IMG]

sorry to fill this thread with my pics, i should start a build up if there is enough intrest?

[speeddemon619]

Id be interested to see some more of the pictures for sure!

[John McIntire]

Good lord! The metalwork on that truck is sick! Nice skills you got there!

[Ash]

I second that....a build thread would be nice

[AndrewNTX]

63.5 Hardtop Falcon Sprint...

[Tukn]

thanks guys, check the build up thread for 03 Mitsubishi Triton. i didn't do the work boys so can't claim the fab work but check it out

[Bryce]

63.5 Hardtop Falcon Sprint...


sweet falcon.

here is where mine currently sits. I have to cut the trunk to get clearance for the axle housing. i will get better pictures soon.

[rogue]

My Continental and my 69

https://static1.pt-content.com/images/pt/2009/08/IMG_2668-1.jpg

https://static1.pt-content.com/images/pt/2009/08/IMG_1425JPG-1.jpg

[MIGOAT]

I love the 69 and the vinyls or magnets. I thought of doing something similar just too change things up sometimes, looks great

[tones2SS]

I love the 69 and the vinyls or magnets. I thought of doing something similar just too change things up sometimes, looks great

Yeah, she runs pretty good too! There are some videos of it on youtube.com Maybe Rogue will post them for you.

[BritishGreen68]

Bbbuuuummmpppppp

[Memphis]

A local car

https://static1.pt-content.com/images/pt/2009/10/1fc14dc5-1.jpg
https://static1.pt-content.com/images/pt/2009/10/4f2f898b-1.jpg
https://static1.pt-content.com/images/pt/2009/10/a868d55d-1.jpg
https://static1.pt-content.com/images/pt/2009/10/db12d05d-1.jpg
https://static1.pt-content.com/images/pt/2009/10/be1a3c48-1.jpg
https://static1.pt-content.com/images/pt/2009/10/8a72e24d-1.jpg

[usa-69z]

Heres my 69... RHD converted !
https://static1.pt-content.com/images/pt/2009/10/00531-1.jpg

[Tig]

This is my latest project.

https://static1.pt-content.com/images/pt/2009/07/tahoe-1.jpg

This is one insane Hoe. Do you have a build thread for it? Looks killer. Wish I had the space to tear into mine.

[joemac]

A couple of my favs

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/pt/2009/10/Car4-1.jpg

[compos mentis]

Not a fan of the wing out back but the rest looks good. Just a handful built with this Callaway package.

https://static1.pt-content.com/images/noimg.gif (http://img41.imageshack.us/i/img4418lf.jpg/)

https://static1.pt-content.com/images/noimg.gif (http://img32.imageshack.us/i/img4424f.jpg/)

https://static1.pt-content.com/images/noimg.gif (http://img188.imageshack.us/i/img4460w.jpg/)

https://static1.pt-content.com/images/noimg.gif (http://img26.imageshack.us/i/97630594.jpg/)

[79_GBody]

Just a few of my favs from the GoodGuys Nats
https://static1.pt-content.com/images/pt/2009/10/goodguys055-1.jpg
https://static1.pt-content.com/images/pt/2009/10/goodguys001-1.jpg
https://static1.pt-content.com/images/pt/2009/10/goodguys052-1.jpg
https://static1.pt-content.com/images/pt/2009/10/goodguys063-1.jpg
https://static1.pt-content.com/images/pt/2009/10/goodguys065-1.jpg
https://static1.pt-content.com/images/pt/2009/10/goodguys077-1.jpg

[pitbull73]

that is one bad some b---th luv the stance and the car

[pitbull73]

hey man your car is nice check out my garage i want my 71 chevelle to have that same stance yours has can u give me some details thx.
[email protected] or 423-5051285

[1offwizard]

This is one insane Hoe. Do you have a build thread for it? Looks killer. Wish I had the space to tear into mine.
No build thread yet as it has not progressed much from this point. When I start back up on it I will get a build thread going on one of the truck sites I frequent. This really has nothing PT on it so I won't waste space on this site until my camaro is further along!

[796spdbu]

Heres my tow pig...after just a simple rear air ride...lol


https://static1.pt-content.com/images/noimg.gif

Heres the one I just sold to buy the crew cab...

https://static1.pt-content.com/images/noimg.gif

[WTRacing]

doesnt hold a candle to ANY in this thread.. but here is my truck..

https://static1.pt-content.com/images/pt/2009/11/LSx052-1.jpg

https://static1.pt-content.com/images/pt/2009/11/4021458192_0c2dde14c5_b-1.jpg

[Richio1]

[QUOTE=Hot Rod;561158]Customer's Cars

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/pt/2009/08/interors_by_shannon_JPG-1.jpg
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/pt/2009/08/P627041820Small-1.jpg


https://static1.pt-content.com/images/pt/2007/04/large_coast_to_coast2-1.jpg
Dammmnnn those are good looking cars. I love the orange 69.... some bitchin cares on this thread...keep em coming.

[tones2SS]

This car looks bad ass!!! Love the color of the car. Those wheels would have to go though!

[ACONLP]

https://static1.pt-content.com/images/pt/2010/01/IMG_01601-1.jpg

not the greatest picture, but i like it

[tmadden]

I wish someone could please tell me where i can get the lower rear section like this one has? PLEASE

[tmadden]

heh! i love the killer 69, why wouldnt it be in the same category.

anyways.. some nice nice nice ones on here.. heres another jewel.

https://static1.pt-content.com/images/pt/2006/12/DSC03936-1.jpg
https://static1.pt-content.com/images/pt/2006/12/DSC03941-1.jpg
https://static1.pt-content.com/images/pt/2006/12/DSC03937-1.jpg

post more slammiches.

Can The lower bumper panel be purchased or is that a one off?

[compos mentis]

I think this one is already here but this is a more recent pic.

https://static1.pt-content.com/images/noimg.gif

[HRBS]

Heres a little mustang vert we did a while back.
I cant decide which pic is better.... so heres both:

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

[tones2SS]

Can The lower bumper panel be purchased or is that a one off?

I'm not sure about lower bumper panel, but I do believe that is John LaRue's,(SP?) car. I think it is being being built by Marquez Designs.
AWESOME CAR!!!:1st::1st:

[joemac]

I'm not sure about lower bumper panel, but I do believe that is John LaRue's,(SP?) car. I think it is being being built by Marquez Designs.
AWESOME CAR!!!:1st::1st:

I don't know but it's got some brakes on it

[71RS/SS396]

https://static1.pt-content.com/images/pt/2009/09/61Buick1003-1.jpg

[Crafty One]

https://static1.pt-content.com/images/pt/2009/09/61Buick1003-1.jpg


Is that a '61 Buick Special?

[2008fx4]

https://static1.pt-content.com/images/pt/2010/01/IMG_2727-1.jpg

[cluxford]

https://static1.pt-content.com/images/pt/2009/09/61Buick1003-1.jpg

Damn I love 61 Buick's...may second fav car behind my Camaro

[fat57]

One of minefile:///C:/Documents%20and%20Settings/Harley%20Jones/My%20Documents/My%20Pictures/dads%20fone/Picture%20004.jpg

[fat57]

http://img.photobucket.com/albums/v423/fat57/57_640-2.jpg?t=1263808361

[novanutcase]

https://static1.pt-content.com/images/pt/2009/10/TBirdFa1-1.jpg

John

[joemac]

https://static1.pt-content.com/images/pt/2009/10/TBirdFa1-1.jpg

John

You don't see many of these around anymore, and even less that have some work done to them

[markos920]

almost done..

[71RS/SS396]

Is that a '61 Buick Special?

Nope 61 LeSabre 2dr sedan

[tones2SS]

almost done..

Need more pics of your Markos.
Car looks great.

[Bad94]

This is a truck that we built, and just had it at the indoor show in Cincinnati.

https://static1.pt-content.com/images/pt/2010/01/1_6_012sized-1.jpg
https://static1.pt-content.com/images/pt/2010/01/1_5_001sized-1.jpg
https://static1.pt-content.com/images/pt/2010/01/1_7_009sized-1.jpg

[hotroddr]

This thread is good enough to bring back from the dead, here are a few of mine. The GMC will be bagged, all others are on springs for now.

https://static1.pt-content.com/images/pt/2011/01/21355560002_large-1.jpg
https://static1.pt-content.com/images/pt/2011/01/21355874002_large-1.jpg
https://static1.pt-content.com/images/pt/2011/01/24509710054_large-1.jpg
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/pt/2011/01/33736980002_large-1.jpg

[61ragtop]

Here are some of my '61.........


https://static1.pt-content.com/images/pt/2011/01/10416_154446142504_510462504_2540857_576-1.jpg
https://static1.pt-content.com/images/pt/2011/01/10416_154446122504_510462504_2540854_984-1.jpg
https://static1.pt-content.com/images/pt/2011/01/10416_154446107504_510462504_2540852_345-1.jpg
https://static1.pt-content.com/images/pt/2011/01/61impala004-1.jpg
https://static1.pt-content.com/images/pt/2011/01/61impala003-1.jpg
https://static1.pt-content.com/images/pt/2011/01/DSC01922-1.jpg
https://static1.pt-content.com/images/pt/2011/01/DSC01917-1.jpg

[-CRUISER-]

All awesomeness above :) here's a contribution of my work in progress...

https://static1.pt-content.com/images/pt/2011/01/Truck1-1.jpg?t=1294949169

https://static1.pt-content.com/images/pt/2011/01/Truck4-1.jpg?t=1294949240

And a buddies work in progress that i absolutely love ...

https://static1.pt-content.com/images/noimg.gif

[2blownstangs]

keep em comin!

[Derek69SS]

I'll play...

https://static1.pt-content.com/images/pt/2011/01/autocrosswheels1-1.jpg

[Flowjo43]

One of my 67
https://static1.pt-content.com/images/pt/2011/01/5266215744_30830bb1f5_b-1.jpg

[Coursey]

One of my 67
https://static1.pt-content.com/images/pt/2011/01/5266215744_30830bb1f5_b-1.jpg

That has to be one of the cleanest '67's ever built.

Good Job!!!

[YoungbloodK]

U can say that again... I wonder what kolor is on that bad boi..?

Looks like it could be House of Kolor or something kandy at least....

[Scarelane]

Here's my Fairlane. I guess it's not slammed, but has a pretty nice stance. It's about as low as it can go, but still be fully functional. Had to narrow the rear end a bit.

https://static1.pt-content.com/images/pt/2010/11/IMG_2797-1.jpg

https://static1.pt-content.com/images/pt/2010/11/IMG_2810-1.jpg

https://static1.pt-content.com/images/pt/2010/11/IMG_2807-1.jpg

https://static1.pt-content.com/images/pt/2010/11/IMG_2804-1.jpg

https://static1.pt-content.com/images/pt/2010/11/IMG_2799-1.jpg

[tmadden]

simply outstanding!!! I Love it.

[tones2SS]

One of my 67
https://static1.pt-content.com/images/pt/2011/01/5266215744_30830bb1f5_b-1.jpg

That does look amazing. Any more pics or a build thread?

[Throttle]

My 2000 GMC

https://static1.pt-content.com/images/pt/2008/03/238825216_25e06bd859_b-1.jpg (http://www.flickr.com/photos/26414016@N00/238825216/)
thetwenties (http://www.flickr.com/photos/26414016@N00/238825216/) by throttle_junkie1972 (http://www.flickr.com/people/26414016@N00/), on Flickr

[jerhofer]

https://static1.pt-content.com/images/pt/2011/01/1231101977Camarolf34sm-1.jpg



https://static1.pt-content.com/images/pt/2011/01/1231101977CamaroLR34sm-1.jpg


https://static1.pt-content.com/images/pt/2011/01/1231101977Camarorightsidesm-1.jpg

[digits]

I'll play...

https://static1.pt-content.com/images/pt/2011/01/autocrosswheels1-1.jpg

What wheels are you running on this thing? Your car looks awesome! I've always loved 69' A-bodies, but the F-body is my first love (HAHA).

[DarkBuddha]

Look like 17" Cragar D windows to me.

[Derek69SS]

Yes, 17x9 Cragar D-window... they're VERY heavy. The boxes they came shipped in said 40lbs each. :hammer:

They'll be replaced with CCW Classics as soon as the budget allows. :twothumbs

[shortrack]

ha


https://static1.pt-content.com/images/pt/2013/08/LeMans_zps14a4c148-1.jpg (http://s962.photobucket.com/user/shortrack/media/LeMans_zps14a4c148.jpg.html)

[Mr.VENGEANCE]

this thread...

https://static1.pt-content.com/images/pt/2013/08/dead-1.gif

[MrQuick]

some of my customers rides.

[cactuss4]

Something about the shaved 66's that just does something to the lines of the car. I know they are just door handles, but they appear to break up the car as it should be. Maybe the lack of mirrors, I don't know but I've seen a few shaved 66's and something in the look is off in my eyes. Love the idea, loved the shaved look normally, just on these longer cars, it seems wrong. although that Tangerine color is pretty hot!

[Bigbird3]

A Little something different. I love all types of cars Euro, asian import and muscle included

[Evldoer]

1962 Buick Skylark

https://static1.pt-content.com/images/pt/2013/08/buickatthedells_zps8d6a31cd-1.jpg (http://s44.photobucket.com/user/evldoer/media/buickatthedells_zps8d6a31cd.jpg.html)

[Charles]

My Camaro Still under construction

[sam86]

ha


https://static1.pt-content.com/images/pt/2013/08/LeMans_zps14a4c148-1.jpg (http://s962.photobucket.com/user/shortrack/media/LeMans_zps14a4c148.jpg.html)

wow - this was taken in my hometown. I live just a few minutes away from that track - i pass it all the time...I grew up listening to the nascar cars race, and watched the goodyear blimp from our front porch.

[shortrack]

wow - this was taken in my hometown. I live just a few minutes away from that track - i pass it all the time...I grew up listening to the nascar cars race, and watched the goodyear blimp from our front porch.

North Wilkesboro NC - So Junior Johnson is your neighbour

[shortrack]

And shine is your drink of choice....

[sam86]

haha - He (junior johnson) recently put his property up for auction, which sold for a little over 2mm. So no, not a neighbor anymore!

[Flowjo43]

That does look amazing. Any more pics or a build thread?

I don't have a build thread per se, but here are a couple more.

81666

81667

81668

[Z06killinSBF]

My daily beater 5/6 drop

https://static1.pt-content.com/images/pt/2013/09/87aec87b11fc4dd3b0389c4fd83cbb06_zpsd51b-1.jpg (http://s9.photobucket.com/user/Z06killinSBF/media/87aec87b-11fc-4dd3-b038-9c4fd83cbb06_zpsd51bfc3c.jpg.html)

[alowerlevel]

....

[mueen]

here's mine
https://static1.pt-content.com/images/pt/2014/01/MS-1.jpg (http://s54.photobucket.com/user/mueen/media/MS.jpg.html)

[Lenie]

Foulplay
[https://static1.pt-content.com/images/noimg.gif (https://imageshack.com/i/n5l2d2j)

[Richio1]

Oh hell yeah Lenie. That is sick. Can't wait to see more.

[ZZ430]

67 Chevelle "SS 496"

90103

[Lenie]

Oh hell yeah Lenie. That is sick. Can't wait to see more.
Thanks Jeff, still waiting for photo shoot pics to get back.

[Mr.VENGEANCE]

hell yea Lenie.. best Firebird I know!

[kencobra]

Here's my tri five on airride!

https://static1.pt-content.com/images/noimg.gif

I have seen yours before and think it kicks ass! Yours is my inspiration for my '55 after I finish my '66 Stang.

[TheJDMan]

I have not noticed this thread before. Here's my contribution.

https://static1.pt-content.com/images/pt/2014/02/CAMARO3-1.jpg

[Lenie]

hell yea Lenie.. best Firebird I know!
Huge compliment! Thanks.

[Willis808]

Just joined the forum..Here is one of my rides that could be considered slammed. Its sitting on bags front and back...Will be getting a 56 Bel Air next week, will post pics of that later..

Aloha from Vegas,
Will

101872101873101875

[kmcanally]

101914

[mbales107]

My slammed 1964 Chevelle SS

<a href="https://www.flickr.com/photos/andye666/14853248608" title="DSC_0013 by Andy Eineichner, on Flickr"><img src="https://farm6.staticflickr.com/5574/14853248608_0476fa3198.jpg" width="500" height="315" alt="DSC_0013"></a>

<a href="https://www.flickr.com/photos/andye666/15036772891" title="DSC_0019 by Andy Eineichner, on Flickr"><img src="https://farm4.staticflickr.com/3897/15036772891_3918a4dd65.jpg" width="500" height="331" alt="DSC_0019"></a>

<a href="https://www.flickr.com/photos/andye666/14853238107" title="DSC_0052 by Andy Eineichner, on Flickr"><img src="https://farm6.staticflickr.com/5565/14853238107_1222941d41.jpg" width="500" height="266" alt="DSC_0052"></a>

[shortrack]

https://static1.pt-content.com/images/pt/2014/08/RRview_zpsa4bfd194-1.jpg (http://s962.photobucket.com/user/shortrack/media/RRview_zpsa4bfd194.jpg.html)

[Tig]

Just joined the forum..Here is one of my rides that could be considered slammed. Its sitting on bags front and back...Will be getting a 56 Bel Air next week, will post pics of that later..

Aloha from Vegas,
Will

101872101873101875

WOW, That is AWESOME......
Lets see some more of that bad boy

[Richio1]

Ok I'll play... Here's a couple

https://static1.pt-content.com/images/pt/2014/09/71CE5047A43247D78A6BC80E500C2594_zpsj9qi-1.jpg

https://static1.pt-content.com/images/pt/2014/09/Copyoffall2013043_zps2bfd2c5f-1.jpg

[Lenie]

Jeff, no matter how many times I look at it, one badazz ride.

Ok I'll play... Here's a couple

https://static1.pt-content.com/images/pt/2014/09/71CE5047A43247D78A6BC80E500C2594_zpsj9qi-1.jpg

https://static1.pt-content.com/images/pt/2014/09/Copyoffall2013043_zps2bfd2c5f-1.jpg

[MK69RSSS]

Not all the way down yet.

[MK69RSSS]

Still a good ride