What's Wrong With My Brakes?

[tomspo04]

I've got stock 70 Camaro disks up front, 79 TA disks in the rear and a 68 Vette MC (1-1/8 Piston). The peadal is hard as a rock. Any suggestions? Thanks, in advance.

Tom

[Steve68]

Not enough Vaccuum??? we need more info, type of M/C, what been done etc etc,

[tomspo04]

Steve, Manual brakes...stock 1970 front 11" disks, 1970 TA (stock) 11 rear disks. The MC is a manual brake 1-1/8th piston 68 vette.

[LowBuckX]

1 1/8 piston Master is the problem. That should feel like pushing a brick wall. You need a 7/8 - 1" piston.

Napa 101371
Manual master for 68 vette


Item#: TS 101371

Price: $21.99
Core: $11.25

tax and shipping not included

Disclaimer: The stated price may vary from the in store price and may change at anytime.




Attributes:
# of Line Ports:2
Bore Size:1.00000
Finish:Rust-Preventative Finish
Line Thread Size:9/16-18;1/2-20

[Steve68]

There you go,

[tomspo04]

Thanks, guys...I'll pick one up today.

[tomspo04]

LowBuckX, Who's info is this? Thanks...

Item#: TS 101371

Price: $21.99
Core: $11.25

tax and shipping not included

Disclaimer: The stated price may vary from the in store price and may change at anytime.

I went to the local parts store and had them pull the NAPA PN...I measured the piston at 1-1/8th inch???? Is there a contact that's a sure shot to get the right one?

[LowBuckX]

That is a Napa Part number and info from their site. I got one from them and it was 1" But I had to go to a 1 1/8 for my power set up.

Ive heard Of boxing issues with remaned parts. See if they can get a few and measure them all.



napa cat link
http://www.napaautoparts.com/masterp...d=3&SubCatId=3

[tomspo04]

Will-do...thanks.