Results 1 to 3 of 3
Thread: help! :(
-
07-09-2006 #1
Registered User
- Join Date
- Jan 2006
- Location
- Snohomish, Washington
- Posts
- 2,235
help! :(
ok how hard is this going to be to fix? i emailed killer69 about maybe taking the car to his shop and getting the car going but is this going to be a very expensive fix?
Matt
-
07-10-2006 #2
Registered User
- Join Date
- Nov 2004
- Posts
- 9
I feel your pain
I can't comment on how much it could cost to fix. I am in the middle of fixing the same issue on the 67 'velle. If the rust you can see is all the rust, it shouldn't be too tough to fix. But, you may want to remove the outside pillar post covers and the lower windshield channel and see if you have more of an issue. I removed the lower windshield channel (that connects to the front portion of the dash) and the cowl part it attached to was swiss cheese. I jusst finished rebuilding that and am about to reattach the new lower windshield channel (if that's what it's called). In my case the dash was trashed on the outside edges, so that got removed. Anybody got a 67 Chevelle or Lemans dash?
07-10-2006 #3
Rat Pack Member
- Join Date
- Aug 2002
- Location
- Waleska Ga.
- Posts
- 2,722
I would say about 2 to 3 hrs.tops.Make a patch then cut an weld back in!!
David Sloan
If you’re suggesting sending men with weapons of war to take my weapons of war,then I’m fairly certain that’s what’s called an act of war… and the definition of tyranny.which coincidentally is the reason for the second amendment to begin with!
https://www.pro-touring.com/showthre...ght=fun+camaro
https://www.pro-touring.com/threads/...lcamino-build!
Reply With Quote
