Which Boze wheel?

[brickyard69]

I have a stock wheel tub 69 Camaro (just painted) and it is lowered 2" front and 1.5 " rear.

I wish I could mini-tub it, but I am short on cash (still need a motor).

I want to use a black centered wheel with rivits (like "FUEL").

Take a look at this link (http://www.bozeforged.com/boost.html) and vote which wheel you like best.

1. Boost
2. Mesh
3. Shifter


I will be using 18" X9.5' rear
18" X 8" front

If I can't affort these I will go with the Coys wheel and leave center grey or paint satin black.

[ponchopwr70]

I like the boost one.

[69ratfed]

Boost gets my vote too. Remember your are going to have to polish around those rivits.

[JV69z/28]

Another vote for Boost. Mesh 2nd

[camaro608]

wez gonna go with the mesh

[brickyard69]

I just measured from the rotor (wheel flange to the inner wheel wheel well and it was 6.5".

Is that my backspace?

I think it is 6.5" vs 5.5" because it is a 8.5" Nova rear end vs the stock 8.2".

Does that make sense?

Steve

[mone]

I just measured from the rotor (wheel flange to the inner wheel wheel well and it was 6.5".

Is that my backspace?

I think it is 6.5" vs 5.5" because it is a 8.5" Nova rear end vs the stock 8.2".

Does that make sense?

Stevepretty sure thats not how it works...

[Jims78elky]

I dont know if this is any help,but a good guide buy
budnick wheels..I think fittings are different buy some
wheel companies,but typically should follow the same
for fitting.

Always best to measure twice..and cut once i say.:fingersx:


http://www.budnik.com/techInfo.asp



Good luck with your new wheels!

Post some pictures when ya get them!:woot: