Results 1 to 10 of 10
Thread: Emergency/Park Brake
-
10-25-2004 #1
Registered User
- Join Date
- Aug 2004
- Location
- Carrollton, Texas
- Posts
- 26
Emergency/Park Brake
I have a Baer Track system installed on my 69 Camaro with 12" discs on the rear. Have not hooked up the park brake yet as it is different than the stock one. Does anyone have suggestions or information regarding a good park brake for this system? I am planning on converting to a hand brake.
-
10-25-2004 #2
Registered User
- Join Date
- Aug 2004
- Location
- Maine
- Posts
- 594
I've been considering getting the single disk park brake that bolts in to the rear U-joint on the driveshaft myself... I've seen them on lots of hot rods, but not many muscle cars. I figure this would probably not cost too much, and would make it easy to use a hand brake (as far as routing cables).
Haven't looked into it that much though...John
10-25-2004 #3
Registered User
- Join Date
- Sep 2003
- Location
- Tampa, Fl
- Posts
- 274
Have you lookes at Lokar's stuff yet? They make cables for just about anything.
Brian
'68 Chevy Stepside-Fatman, HTH, 8.8, Baer, Hydratech, LS1/T56. I know it's a truck but you gotta start somewhere and I need the challenge.
10-25-2004 #4
Registered User
- Join Date
- Jun 2004
- Location
- Las Vegas
- Posts
- 593
I still like this guys setup. Same one I'm going with. Would work well with the lokar cables....
http://home.comcast.net/~petelohr/ei...einstyn-14.htm
10-26-2004 #5
Registered User
- Join Date
- Apr 2001
- Location
- La La Land, CA
- Posts
- 2,241
I have replica E brake brackets used in the Mule for sale if you'd like some. It may be just what you were planning on doing.
Tyler
10-26-2004 #6
Registered User
- Join Date
- Aug 2004
- Location
- Maine
- Posts
- 594
The link Keith put up is exactly what I was talking about.
John
10-26-2004 #7
Registered User
- Join Date
- Aug 2004
- Location
- Carrollton, Texas
- Posts
- 26
Brackets
Tyler, let me know how much for the aluminum mounting brackets for the Lokar.
Thanks..............mike
10-27-2004 #8
Registered User
- Join Date
- Aug 2004
- Location
- Carrollton, Texas
- Posts
- 26
Email
Tyler,
I tried to reply to your private email, but apparantly you have exceeded your max number of emails and it won't let me send. Please delete some so I can reply.
mike
10-27-2004 #9
Registered User
- Join Date
- Apr 2001
- Location
- La La Land, CA
- Posts
- 2,241
PM box cleared. Sorry for the delay.
Tyler
10-27-2004 #10
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,838
Control Concepts in Santa Fe Springs, CA can make the cables.
VaporWorx. We Give You Gas http://www.vaporworx.com
Reply With Quote
