View Full Version : Smoothing Firewall, Can I Still Have heat?
Gordz32
05-04-2006, 10:59 AM
Hey Guys, This might be a dumb question but her it goes. I want to smooth the firewall on the chevelle, The car originally had A/C, My dad doesn't want it, but he does want heat and defrost capabilities. I was looking at the MWPE Firewall Smooth kit to do the job. But am I going to need the big blower box with the a/c crap in it. I don't know alot about that heat /AC stuff so help me out. I've seen that some guys just have the clean looking 4 lines on the passenger side going through the firewall. Excuse the stupidity but I need some help. Thanks again Chris
B Schein
05-04-2006, 12:32 PM
Vintage air sells a defrost/heat only set up.
protour70
05-04-2006, 01:41 PM
You can also go to a stock heat/defrost unit instead of the stock a/c-heat. You will still have the outer heater shroud, but if you want it totally smooth I guess the V/A unit will work as well. I have 2 stock heater/defroster units if your interested 68-72 A body...Mike
John McIntire
05-04-2006, 02:54 PM
yeah, you can get a vintage air unit, and it hangs on the inside of the firewall, the interior side, and replaces the factory heater core. Then you can use a bulkhead fitting ont the firewall so you can route your hoses.
Thats what I'm doing to mine!
John
Gordz32
05-05-2006, 12:16 AM
which vintage air system? Part # ?
Overkill
05-05-2006, 04:21 AM
which vintage air system? Part # ?
They make a universal heater/defrost kit that has a number of 50616-VUZ and there is a compact series that has a number of 50615-VUH.
Damn True
05-05-2006, 07:26 AM
This holds true for 1st Gen F-body as well?
Overkill
05-05-2006, 12:10 PM
This holds true for 1st Gen F-body as well?
I would think that it would. You would probably have to make some mounts for it, but I don't know why it wouldn't work. On mine, I have the Sure Fit unit. I guess it would be more money, but you could always buy it and not hook up the A/C portion. Plus it would be there down the road if you decide that A/C would be nice to have.
John McIntire
05-05-2006, 02:39 PM
Thats what i am doing for now, I have a GEN II supercooler, and only am hooking up the heater part, then down the road, I'm going to put in the AC.
Call Vintage Air, or visit their site, you can downlaod their catalog and look through it.
John
Powered by vBulletin®